Taigen 1/16 King Tiger review

Feel free to discuss anything and everything to do with tanking here!
Kye
Private
Posts: 74
Joined: Thu Jan 17, 2013 12:25 pm
Location: Northamptonshire, UK

Taigen 1/16 King Tiger review

Post by Kye »

Hello all

I finally got around to putting together a quick review and photos of said tank.

First impressions is that it is a heavy beast! It comes with metal tracks, metal sprockets and idlers, metal running wheels, metal suspension and metal shackles. The suspension has a reasonable amount of suspension, but I can't tell if it is too soft or not. I suppose I'll find out once I install a metal hull in the future.

The finish is pretty good and comes in a, I feel, pretty attractive paint scheme. I'm happy with it as it is, but time will tell how good it is with use. On close inspection the two colours do not edge together cleanly but rather merge together. Some may like that, some may not. I do. All in all the detail is pretty good and it comes with the towing cables and barrel cleaning rods attached to it already. The rest is for your enjoyment to attach.

It drives like every other stock tank, two speeds forward. It can climb over some quite high obstacles, which is far better than my Panzer 4 can manage.

With the speak volume turned to minimum it is a pretty noisy thing but I suppose they all are. The turret traverse is really loud for what is a small motor. I guess it could be down to the space inside the hull and the echoing. With the sound turned up it is a pretty meaty sounding thing. An improvement over the older generation, but still not high quality. I've seen on here that people like the new MG sounds. I don't myself. It isn't in keeping with the tank. It sounds like it has a 30mm Bushmaster as a coaxial!

Now for the disappointing part- the gun. It's over 30cm, looks the business, but fires like utter crap. The air soft unit is hideous. It misfired a lot or anything it do propel merely flopped out of the muzzle. Hardly 88-esque. I pulled it out and took it apart and found the the O-ring was facing the wrong way around. The tapered end was facing into the barrel and providing a poor seal. I have turned it around and the the gun shoots better when it doesn't miss fire. It doesn't have the power of the Panzer 4 (that stings!) but then I am mindful that I am using high quality .25g BB's at the moment until I can afford some .20g's. The ones that come with the tank are rubbish. I've binned mine. The quality of the barrel internally is poor. It's quite pitted. I have given it a clean out but it still isn't brilliant. When I can get my hands on my rifle cleaning kit I'll give it another, proper try. On a plus side, (Whey there is one!) the barrel is made from one piece of metal. Sadly though I don't think there is space to fit a tightbore inside it unless you are a ninja on a lathe.

That I think, is about it. If you have any questions ask away and I'll try to answer them :). Now I will leave you with some photos.

Image

Image

Image

Image

Image

Image

Image

Image

Image
User avatar
lister fiend
Sergeant
Posts: 565
Joined: Mon Sep 10, 2012 3:38 pm
Location: ashvale, hampshire

Re: Taigen 1/16 King Tiger review

Post by lister fiend »

hi kye
yep, thats a looker :D
cheers
lister :wave:
Kye
Private
Posts: 74
Joined: Thu Jan 17, 2013 12:25 pm
Location: Northamptonshire, UK

Re: Taigen 1/16 King Tiger review

Post by Kye »

Wee update.

I have fixed the reliability of the airsoft unit. It would seem that as the nozzles comes forward, it knocks the bb's out of the feed chute. I have put a piece of plastic over the top of the hole that the nozzle and feed chute go into and voila, no more misfeeding!
teddyt
Lance Corporal
Posts: 146
Joined: Sat Nov 24, 2012 8:15 pm
Location: south northants

Re: Taigen 1/16 King Tiger review

Post by teddyt »

as a straight out the box, Tank
I think it looks pretty nice,both camo and finish
If at first you can't fix it , hit it with a big hammer


TANKS
4 Tiger 1's
King Tiger
Panzer 3
Challenger 2
Bulldog
Sangu1n1us
Recruit
Posts: 15
Joined: Mon Feb 11, 2013 2:55 pm

Re: Taigen 1/16 King Tiger review

Post by Sangu1n1us »

ere is a question for ya......i have the Tiger and no doubt they use the same paint to paint both the T1 and the KT....how would you go about stripping the paint off one of these ?? :think:
User avatar
FreakyDude
Corporal
Posts: 391
Joined: Thu Aug 04, 2011 8:31 pm
Location: Canada

Re: Taigen 1/16 King Tiger review

Post by FreakyDude »

why strip it? just put some primer over the top and repaint it from there.


Kye Have you opened this tank up yet? I was wondering if you got the clear smoker in it?
Sangu1n1us wrote:ere is a question for ya......i have the Tiger and no doubt they use the same paint to paint both the T1 and the KT....how would you go about stripping the paint off one of these ?? :think:
A Joke is a very serious thing
Winston Churchill
Sangu1n1us
Recruit
Posts: 15
Joined: Mon Feb 11, 2013 2:55 pm

Re: Taigen 1/16 King Tiger review

Post by Sangu1n1us »

FreakyDude wrote:why strip it? just put some primer over the top and repaint it from there.
Because IMO the paint job on some parts of the Taigen tanks can be pretty heavy and just adding more paint to it is just gonna make things worse.....plus it's the perfectionist in me that wants to paint something from as new and clean (get right back to the plastic) as i can get it.

more time spent in preparation the better the final paint job will be.
Kye
Private
Posts: 74
Joined: Thu Jan 17, 2013 12:25 pm
Location: Northamptonshire, UK

Re: Taigen 1/16 King Tiger review

Post by Kye »

Freaky, I have opened it up and I think it may well have the the clear smoker unit.

As for stripping the paint off of it. I don't know if I would. But if I wanted to repaint it, I think I'd prime it and go over the top of the current stuff.

It isn't a bad paint job as is, but could possibly do with being a bit thicker and maybe have a matt protective layer over it.

I'm going to upgrade the gears, add a metal hull and do the electronics first on it. Then I may look into doing the cosmetic side of it. I wouldn't mind giving the tracks a going over and giving them a used, slightly rusty and dirty look as well. I'm some places (the flash didn't help) it looks like something has been painted onto the tracks to make them black.
User avatar
Rocketman
Sergeant
Posts: 604
Joined: Tue Sep 30, 2008 5:17 pm
Location: Surrey Hills
Contact:

Re: Taigen 1/16 King Tiger review

Post by Rocketman »

As for the stripper try Phoenix paints. They do a great one specifically for plastic.
Sangu1n1us
Recruit
Posts: 15
Joined: Mon Feb 11, 2013 2:55 pm

Re: Taigen 1/16 King Tiger review

Post by Sangu1n1us »

oh right...sweet i'm gonna go and check them out
Post Reply

Return to “General Discussion”