Futaba 6EX-2.4GHz, 6 channel FASST TX

[Sydney]

Does anyone know how to set these up,i have been through the manual many times and it
always relates to Aircraft or Helicopters.I have managed to get a few functions on the tank working,
but very limited.Do you use EPA settings first then Dual rate? any help really appreciated.

Syd

[FreakyDude]

Syd
what you setting it up for? Tamiya, Hooben, Heng Long? what electronics do you have? I think you will get more answers if you give us some detail on what it is your trying to do.

[Sydney]

I can get everything working except the gun recoil system on a Chunwai Challenger 2 1/8 scale.

The control for the gun is on channel 5 , on the TX it is the "H Gear / HGyro " switch( just above the
throttle/rudder control stick.

The recoil system works with an electric motor that revolves and activates a cam that makes the barrel
recoil.

What i am wondering is what sort of settings do i apply on channel 5, do i use EPA, Dual rate, etc

Personally i find the Futaba too complicated to set up, maybe its just me not being used to it.

Any advice would be really appreciated.......thanks.......Syd

[Sydney]

Well i found out what the problem is with the recoil, the motor is seized up!,
emailed Chunwai models and asked for a new motor(not even 2 months old so should have warenty
on it -i hope!).