Torture Test

Feel free to discuss anything and everything to do with tanking here!
Post Reply
User avatar
Battlechip
Recruit
Posts: 27
Joined: Sat Oct 06, 2012 7:03 am
Location: Perth Western Australia

Torture Test

Post by Battlechip »

Torture Test Start.jpg
Torture Test Start.jpg (101.38 KiB) Viewed 242 times
On Hill.jpg
On Hill.jpg (80.42 KiB) Viewed 242 times
Hard Left.jpg
Hard Left.jpg (86.36 KiB) Viewed 242 times
Digging.jpg
Digging.jpg (107.15 KiB) Viewed 242 times
Sinking.jpg
Sinking.jpg (89.1 KiB) Viewed 242 times
Torture Test Finish.jpg
Torture Test Finish.jpg (83 KiB) Viewed 242 times
Support Bearing.jpg
Support Bearing.jpg (67.54 KiB) Viewed 242 times
Drive Parts.jpg
Drive Parts.jpg (69.57 KiB) Viewed 242 times
Idler Wheel Parts.jpg
Idler Wheel Parts.jpg (74.43 KiB) Viewed 242 times
I ran a M2 through the floor to stop twisting
I ran a M2 through the floor to stop twisting
Drive Brace.jpg (66.23 KiB) Viewed 242 times
Hi All, I have a Mato Metal Tiger 1:16 weighs 7kg.It has the brass gearbox,the only power increase is from 7.4v LiPo.It has the standard Heng Long Electrics.I took some pics of its offroad capability while trying my best to break it.I also took some pics of the mods since I had to re-shim the mainshafts.It took all i could give it for over an hour(inbetween beers) the only thing to fail was the stock motors which are cooked, haha now I can go 3cell LiPo with low wind brushless.
You can get much farther with a kind word and a gun, than you can with just a kind word-Al Capone
Top
tisaksen
Lance Corporal
Posts: 173
Joined: Thu Aug 11, 2011 9:10 am
Location: Norway

Re: Torture Test

Post by tisaksen »

Cool, I'm switching to Lipo today. What size are the bearings you're using?
Top
Post Reply

Return to “General Discussion”