tamiya kingtiger turret problem

If you have a tank query and you can't find the answer anywhere else, post here. (TIP - Check for answers in FAQ, use the 'search' facility or even check this board before posting here).
Forum rules
If your question is electronics related please post it in one of the relevant boards here: viewforum.php?f=31
Post Reply
User avatar
Jack9413
Recruit
Posts: 13
Joined: Fri May 11, 2012 5:52 pm
Location: St Helens

tamiya kingtiger turret problem

Post by Jack9413 »

I have been having problems with my kingtiger turret but any thing I look at that shows how to fix the problem involves glueing the cluch gear or removing it altogether and I dont want to do this because my baby brother likes to pull the gun causing the turret to turn slightly and without the cluch gear damage would be caused. I know that no wires are fouling the rotation unit but it refuses to rotate, I get a few mm then a clicking noise with I think is the cluch engaging, any help will be very appreciated.

Thanks jack
Tiger? Sherman? Ha I'm brittish give me a Cromwell any day!!
User avatar
mustclime
Sergeant
Posts: 560
Joined: Sat Jul 16, 2011 3:17 am

Re: tamiya kingtiger turret problem

Post by mustclime »

Sounds like the teeth on the clutch are toast. Cut out your baby bothers kiddney, sell it, and buy a new turret gear motor set. Tell your bb that if he messes with your tank any more you will take his last kiddney........ >:< ......Check the gear mesh with the hull off and turning the turret, sometimes the gear box gets a little out of wack....you could try to take the whole mess apart and cleaning up the teeth with a knife but it sounds like its on the way out :(
User avatar
Jack9413
Recruit
Posts: 13
Joined: Fri May 11, 2012 5:52 pm
Location: St Helens

Re: tamiya kingtiger turret problem

Post by Jack9413 »

Ttanks for that some what sinister bit of advice. Ill give the hull off idea a go and try to see what going on.
Tiger? Sherman? Ha I'm brittish give me a Cromwell any day!!
User avatar
ruben2005
Sergeant
Posts: 664
Joined: Wed Oct 19, 2011 2:40 pm
Location: swindon wilts

Re: tamiya kingtiger turret problem

Post by ruben2005 »

:wave: :thumbup: :thumbup: hello mate could you post a pic of your turret as both my tamiya kts turn then suddenly stop and the problem was two things 1 as the upper body was put on to hull wires were stopping it turning 2 i put a small amount of grease on the turret ring and some on the turret motor gears now all are fine. with out a pic i cant see if your prob is like mine hope this helps if not pm me ok
fetch me the kitty's lets go to war
Reaper332
Corporal
Posts: 484
Joined: Wed Jan 11, 2012 8:54 pm

Re: tamiya kingtiger turret problem

Post by Reaper332 »

Hey Mate the clutch gears arent overly strong and weaken after some use causing the slightest obstruction to stop the turret turning and you just hear the clutch clicking away. Now if all your wires are ok inside and not getting caught or what ever then you can bet the clutch gear is stuffed so then go buy yourself the tamiya 6 speed gearbox - http://www.tamiyausa.com/product/item.p ... t-id=72005
and use the Blue clutch gear out of the kit and that will solve your problems as thats what I am about to do to mine and all the guys in my club have done it to there's..

Hope this helps,

Ken
Tankie
Lance Corporal
Posts: 182
Joined: Wed Jan 14, 2009 12:33 pm
Location: UK

Re: tamiya kingtiger turret problem

Post by Tankie »

I agree the clutch weakens with time and will be the culprit but be warned - i modified mine and burned out the DMD transistor. A more radical approach I took with my KT was to replace the whole gear with the Heng Long ring and gear - works a treat all the time.
Post Reply

Return to “General Questions”