PzIV Puzzler

Feel free to discuss anything and everything to do with tanking here!
Post Reply
User avatar
Mackem
Staff Sergeant
Posts: 752
Joined: Thu Oct 02, 2008 4:22 am
Location: Sunderland

PzIV Puzzler

Post by Mackem »

Hi All,

I had the PzIV apart yesterday to run in the gearboxes/motors and decided it was the perfect opportunity to re-position the power, sound and smoke switches.
The problem is that there's nowhere nice and easy (like the PzIII engine deck) on the lower hull to put them.
I'm sure somebody here will have tackled this problem already, so if you have, will you post your solution please?

Cheers
John
HE/HL Leopard 2-A5, HL Pz IV-F1, HL Jagdpanther (WIP), M26A1 Pershing (WIP), HL Pz III M (WIP), Bandai Hummel (WIP)
tankman

Re: PzIV Puzzler

Post by tankman »

Hi John I have been looking at my Panzer IV prototype build and I think the only option for the sound switch ( if you want easy access is to drill a ho;e in the panel and mount it flush with the surface. You will have to use plastic packers to space it out from the inner rear panel wall. Looking at the on off switch somewhere under the exhaust looks a good place where it won't be seen. All I am thinking of doing is cutting down the arm on the switch and using a small electrical screw driver to move the stub to the on or off position. As to the smoker switch I don't know as I junked mine. But you could use the same idea as the on/off switch and mount it  somewhere on that rear panel as there are plenty of nooks and crannys on there. All the best for now
Alan

PS check the picture and you can see where I have drilled a hole in the auxuliry muffler for the volume control ( the rusty looking bit )
Rivetcounter
Sergeant
Posts: 540
Joined: Sat Sep 27, 2008 12:04 pm
Location: Brussels, Belgium

Re: PzIV Puzzler

Post by Rivetcounter »

With the Bandai Stug IV I placed the switches below the rear engine hatches no ides if this works on the Heng Long version
They shall not grow old as we who are left grow old.
Age shall not weary them, nor the years condemn.
At the going down of the sun and in the morning,
WE WILL REMEMBER THEM
User avatar
Mackem
Staff Sergeant
Posts: 752
Joined: Thu Oct 02, 2008 4:22 am
Location: Sunderland

Re: PzIV Puzzler

Post by Mackem »

Had a Bandai PzIV f2 some time ago, as I remember the engine deck hatches were hinged., the HL Pz IV rear deck is solid.
Had a poke around earlier and came up with 2 options :-

Hide the switches under the exhaust.
Put them in the turret, the side hatches open.

Cheers
John
HE/HL Leopard 2-A5, HL Pz IV-F1, HL Jagdpanther (WIP), M26A1 Pershing (WIP), HL Pz III M (WIP), Bandai Hummel (WIP)
philipat
Sergeant
Posts: 530
Joined: Wed Dec 24, 2008 3:26 am

Re: PzIV Puzzler

Post by philipat »

Check Asiatam's site, they have operating deck hatches and front tranny hatches.  You could get them, cut out the solid HL hatches and put the switches there.
User avatar
Mackem
Staff Sergeant
Posts: 752
Joined: Thu Oct 02, 2008 4:22 am
Location: Sunderland

Re: PzIV Puzzler

Post by Mackem »

Had a look at Asiatam, they have metal engine deck hatches, gearbox access hatches, and driver and radio operator hatches.
Looks like the PzIV will be getting even more metal ;D ;D ;D
Cheers philipat
HE/HL Leopard 2-A5, HL Pz IV-F1, HL Jagdpanther (WIP), M26A1 Pershing (WIP), HL Pz III M (WIP), Bandai Hummel (WIP)
Post Reply

Return to “General Discussion”