Trim Controlls
Forum rules
If your question is electronics related please post it in one of the relevant boards here: viewforum.php?f=31
If your question is electronics related please post it in one of the relevant boards here: viewforum.php?f=31
-
LongGoneJohn
- Private
- Posts: 87
- Joined: Mon Dec 19, 2011 10:11 am
- Location: Portsmouth, England.
Trim Controlls
does anyone know if i can reset the trim controlls on my tx? i've had to push the throttle trim all the way up or the motors whine.
Would you put your brain in a robot body?
-
jackeb
- Lance Corporal
- Posts: 109
- Joined: Tue May 31, 2011 5:48 pm
- Location: March, Cambridgeshire. England.
Re: Trim Controlls
What Tx are are you running bud?
If you can try wacking the travel adjust (end points) up on the throttle channel. Check that you sub trim is on zero and get rid of any expo you might have on that channel.
Let us know how you get on.
If you can try wacking the travel adjust (end points) up on the throttle channel. Check that you sub trim is on zero and get rid of any expo you might have on that channel.
Let us know how you get on.
-
caddyshack
- Sergeant
- Posts: 501
- Joined: Wed Jun 15, 2011 8:31 pm
- Location: Uk
Re: Trim Controlls
If its a Hl set up. I had this prob on one of mine..Its the cheap esc neutral point isn't set properly, you will never be able to set it as it is. The only way round it is a new Rx18 and hope that one is ok.
if it is an after market hand set. Then just go into the menu and adjust and all will be good.
if it is an after market hand set. Then just go into the menu and adjust and all will be good.
Man will occasionally stumble over the truth, but most of the time he will pick himself up and continue on.
~~~Winston Churchill~~~
~~~Winston Churchill~~~
-
caddyshack
- Sergeant
- Posts: 501
- Joined: Wed Jun 15, 2011 8:31 pm
- Location: Uk
Re: Trim Controlls
The other thing you could do it. Pop the wires out of the connector blocks on both trim pots and swop them over for a test. If its just the pot then its a nice easy fix.
Last edited by caddyshack on Fri Feb 10, 2012 5:25 pm, edited 1 time in total.
Man will occasionally stumble over the truth, but most of the time he will pick himself up and continue on.
~~~Winston Churchill~~~
~~~Winston Churchill~~~
-
LongGoneJohn
- Private
- Posts: 87
- Joined: Mon Dec 19, 2011 10:11 am
- Location: Portsmouth, England.
