http://www.store-juckenburg.de/catalog/ ... cts_id/196" onclick="window.open(this.href);return false;
- E100 KIT
E-100 Competition Model RCPKF
Re: E-100 Competition Model RCPKF
I think I found the site?
http://www.store-juckenburg.de/catalog/ ... cts_id/196" onclick="window.open(this.href);return false;
http://www.store-juckenburg.de/catalog/ ... cts_id/196" onclick="window.open(this.href);return false;
Re: E-100 Competition Model RCPKF
Saxondog wrote:I would really like to have one of these,Hooben is just not ever going to bring an E100 to market. Would you have a link to the Juckenburg site? Sax
?
I don't think Hooben would've gone this far and not release one. Just may take a bit of time. I just hope they may learn from their mistakes made with the T55.
Re: E-100 Competition Model RCPKF
hello,
yes this is the site but the complete model is resin.
Hooben whether the E-100 brings is ever really questionable.
Chris Ludwig will already have a basic model.
I need a jug for zinc mine producing parts for a reasonable price.
Then I could offer chain drive and idler, maybe the wheels but must still be drawn and 3D printing.
yes this is the site but the complete model is resin.
Hooben whether the E-100 brings is ever really questionable.
Chris Ludwig will already have a basic model.
I need a jug for zinc mine producing parts for a reasonable price.
Then I could offer chain drive and idler, maybe the wheels but must still be drawn and 3D printing.
Re: E-100 Competition Model RCPKF
Chris is diffidently making some nice kits, I have been waiting on the HOOBEN E100 for almost two years and nothing has been offered. At this point the resin kit and some parts from Chris seems the best way to have an E100.
Riebe, your inner hull and drive system is a custom build? If so could you point me in the right direction? I purchased an extra Tamiya King Tiger lower hull,considered this for my lower section. If I cut the hull down the middle and add a center section to give me the correct hull size? But where did you start? Cheers Blake
Riebe, your inner hull and drive system is a custom build? If so could you point me in the right direction? I purchased an extra Tamiya King Tiger lower hull,considered this for my lower section. If I cut the hull down the middle and add a center section to give me the correct hull size? But where did you start? Cheers Blake
Re: E-100 Competition Model RCPKF
Hello Blake,
I didn't use any Tamiya King Tiger lower hull. I think it would be pretty complex to modify the lower hull to make it fit. I took the measures from the Trumpeter 1:35 E 100 and cut it from an alu sheet.
What I can do to help you is, that I write the measures into my images from the links above so you can adjust your Tamiya lower hull.
Here another possibility http://www.ludwigs-hobby-seite.de/e100.htm" onclick="window.open(this.href);return false;
Hope I can help you with this, if not don't hesitate to ask again.
I didn't use any Tamiya King Tiger lower hull. I think it would be pretty complex to modify the lower hull to make it fit. I took the measures from the Trumpeter 1:35 E 100 and cut it from an alu sheet.
What I can do to help you is, that I write the measures into my images from the links above so you can adjust your Tamiya lower hull.
Here another possibility http://www.ludwigs-hobby-seite.de/e100.htm" onclick="window.open(this.href);return false;
Hope I can help you with this, if not don't hesitate to ask again.
