engine cover

Fixes and mods for the HL Jagdpanther
Post Reply
CHIEFSONN
Lance Corporal
Posts: 102
Joined: Wed Jan 07, 2009 2:47 am

engine cover

Post by CHIEFSONN »

The 4 hooks on the engine cover are facing inward and should be facing outward, so to change this I used a razor knife and cut,scraped along the under side where they are glued in and then apply nail polish and give it a few seconds .and then I wiggle,pull them off. And when you are down with that there is the triangle,it is set to far after and should sit about centre with the hinge it is closest to. this also applies to the panther G I'm guessing I do not own one @ this time. I hope this helps.
Wayne
Top
artyops
Recruit
Posts: 1
Joined: Tue Apr 27, 2010 1:36 am
Location: Cramlington Northumberland

Re: engine cover

Post by artyops »

Hi.Wanye.
Thanks for the info, I managed to get some covers for the R/H/S grills from Red Dragon they've improved the look of the enginedeck
Regards Steve.
Top
Post Reply

Return to “HL Jagdpanther”