H/L return rollers

KV1s · Post by **KV1s** » Sun Jul 18, 2010 7:41 pm

Hi Guys

Kv nearly all stripped ready for painting,tracks etc..

1 thing holding me back,do the return rollers come off as i have looked at several options and none seem to work

Aaron

daisycutter · Post by **daisycutter** » Mon Jul 19, 2010 2:08 pm

yes but there are REALLY in there and can take some force to remove,careful you dont damage the hull trying

KV1s · Post by **KV1s** » Mon Jul 19, 2010 3:13 pm

i did try but they didnt want to budge so i sprayed them in situ..

starktiger 1 · Post by **starktiger 1** » Thu Jul 22, 2010 6:17 pm

Hi
I used two forks
them big ones you use to eat steak with.

Make sure you finish your steak first though
there is nothing worse than a piece of steak stuck in the wheels

Jon

kclank · Post by **kclank** » Wed Aug 04, 2010 6:45 pm

i just did mine. i laid the lower hull on it's side, put a couple of wood blocks around the whell mount and tapped out the pin with a hammer and pin punch.

RC Tank Warfare community hobby forum

H/L return rollers

H/L return rollers

Re: H/L return rollers

Re: H/L return rollers

Re: H/L return rollers

Re: H/L return rollers