how do I get top off kv1 hull ??

Feel free to discuss anything and everything to do with tanking here!
Post Reply
percy1510
Corporal
Posts: 363
Joined: Sat Oct 04, 2008 5:22 pm
Location: Stoke on Trent

how do I get top off kv1 hull ??

Post by percy1510 »

Any one know where all the screws are on the kv1 hull. I have removed 6 big screws from bottom of hull but top wont come off, any idead where the other screws are

glyn
KV1s
Lance Corporal
Posts: 223
Joined: Mon May 24, 2010 5:28 pm
Location: Dover,,Kent

Re: how do I get top off kv1 hull ??

Post by KV1s »

There are a couple of smaller screws on the side of the hull very close to the rear sprockets,,find of hard to see 1st off but you get used to them..lol

Dont worry,took me a while to find them as i was too embarrased to ask.

Aaron
h/L Kv1 with metal tracks,,,Tamiya Tiger1 (now broken with no elecs) and a Tam/HL hybrid Jagdpanther
percy1510
Corporal
Posts: 363
Joined: Sat Oct 04, 2008 5:22 pm
Location: Stoke on Trent

Re: how do I get top off kv1 hull ??

Post by percy1510 »

thanks Aaron
found em. they are virtually impossable to see.

cheers
Glyn
KV1s
Lance Corporal
Posts: 223
Joined: Mon May 24, 2010 5:28 pm
Location: Dover,,Kent

Re: how do I get top off kv1 hull ??

Post by KV1s »

i use a smaller screwdriver to get them,very close to the sprocket...

As far as i know there isnt really a need to put them back,took mine out for good 2 weeks ago as they are a pain

Aaron
h/L Kv1 with metal tracks,,,Tamiya Tiger1 (now broken with no elecs) and a Tam/HL hybrid Jagdpanther
Post Reply

Return to “General Discussion”