H/L KV help needed

[KV1s]

Hi Guys

The modding has finally started to kick in with me,(only taken 2 weeks) and i'm seeking a little help please

1) how do you split the plastic tracks?

2) is it possible to cut more teeth in the turret ring for 360 degree rotation?

Thanks in advance

Aaron

[Silverstalker]

looking side on at the tracks' there are little pins going through each link, get pin, or a tiny screw drive,r and push it out the other side

you could 360 the turret, but the wires will eventualy all get tangled up on them self

[KV1s]

I was thinking of the wiring but all the while i remember which way it rotated it should be ok..

As for the tracks,,thanks. i wasnt sure if that was the way to do it

Aaron

[fv432]

hi Kv ive done the 360 degree mod on all my tanks fairly easy to do you just need to file the "lump" on the ring to size and add the extra teeth that are moulded out

i used another turret ring as a guide for this

[daisycutter]

might be an idea to add a lttle lengh of chain between the the turret ring and somewere inside the hull to stop the rotation going so far as to twist the cables

[KV1s]

Thanks for that good idea..
Im in the process of filing it down now having made a very playschoolesq card template,it seems to line up but it is very close...

[Silverstalker]

got me inspired to do mine...i got chopping last night works well?

[sassgrunt]

I read somewhere about someone using a "rotating connection" that's used to keep your telephone cord from twisting. Seems like it might help in this 360-degree application. Has anyone tried this?

-Mike

[Silverstalker]

thats could work quite easy' a simple bit of wiring etc

[KV1s]

It would be quite easy to do,,the only wires that twist on my H/L are the 3 wires that move the barrel,fire the BBs..

I took the precaution of untwisting my wires to give me a few rotations in each direction as a safety net too

Aaron