Panzer 3 rewire Please help

[tanktop]

Hi guys i am trying to change the motors and electronics from my heing long p3 into my asiatam lower hull,
I have the motors in but i am haveing trouble with finding space to fit all boards in.
The instructions seem to be showing rx18 boards, and i think my board are rx14.
So fitted the boards as per insructions, speak then smoke unit but this dosent seem to leave enough room for the larger board.? can any please help
regards Tanktop

[Saxondog]

]Tanktop,my Tiger asiatam hull component tray was designed for the rx14.I ground down those post and remounted the RX18 in the same space.On the PIII I think they designed the tray for RX18.Here are some photos that may help. http://www.members.shaw.ca/grossdeutsch ... ehicle.htm" onclick="window.open(this.href);return false; http://www.members.shaw.ca/grossdeutsch ... ehicle.htm" onclick="window.open(this.href);return false; http://www.members.shaw.ca/grossdeutsch ... ehicle.htm" onclick="window.open(this.href);return false;

[tanktop]

hi sax thanks for the pics, i see that with your tiger you can mount the speaker on the side of the tank so giveing you more room on the board to mount electrics, where in my case i have to mount the speaker on the same board the smoke unit and electricals. ithink that rx 18 control board is smaller.
regards Tanktop

[tanktop]

hi everybody i am still look for some help with the wireing . i am trying to put everthing back togther but i have hit a bit of a problem ,i have a lose white wire which atached to the main board but i am not sure where it goes , can someone tel me how many wires go to the on of swich is it 2 or 3 ? any help wold be gratefully recived. p s you may gused electrics are not my strong point ,the board is an rx14
thanks tanktop

[fv432]

dont connect the white wire its a board killer

the on/off switch uses the red + and is an in out affair from the battery

so + in from the batt and + out from the switch to the main board


i put battery+ in the middle leg of the switch and board + on either outer leg you may have to switch the switch around if off becomes on and vice versa