wsn electrics swap to rx18 help

[boxerdog]

i have suffered a major problem with my heng long tiger to the point where its totaly wreaked, i have a wsn t34 and a wsn tiger, i was thinking of upgrading one of them to rx18 using parts from my h/l tiger, how easy would it be to transplant things over and which would be either better or easier, the tiger or t34? is it possible to use the high voltage flash on a wsn recoil? instead of the horrid red led the have? maybe put the h/l metal tracks on my wsn tiger? , so as you can see i have h/l tiger with metal sprockets,idlers, gearboxes,tracks, and rx18. so what do you guys recommend?, i also have metal track tensioner that i tried to fit on the h/l.
please help me im lost as what to do

thanks trev

[Saxondog]

Trev.I have never done this but a few members have,Oz has a WSN TIGER and I believe he has converted. Maybe he can help. Blake http://www.rctankwarfare.co.uk/forums/v ... =81&t=1782" onclick="window.open(this.href);return false; http://rctankwarfare.co.uk/forums/viewt ... =81&t=1016" onclick="window.open(this.href);return false; Trev found these two post about WSN electronics maybe they will help.

[wibblywobbly]

Like this you mean?

Though mine has a Darkith in place of the HL IR. You will be lucky to get the WSN led out of the barrel without breaking the barrel, they are epoxied in.



Its quite an easy switch over. Just remove 100% of the WSN wiring.

You need a +/- wire on the barrel elevation motor, the turret motor, and each drive motor.
Connect these to the corresponding plugs on the RX18.

If you fit a Darkith, give me a yell and I will tell you what goes where.

Rob G

[jrc]

I've just swapped over to an rx-18 in my t34, it's just as Rob G says, take it all out.
You can keep the recoil/flash and gun sound from the old wsn set-up too.

[Steenv]

Thats easy - I am going to do that as well. I have my T-34 and a rx 18 board looking at eachother on the shelf. Time to get them paired

cheers
Steen
http://www.panzerteam.dk" onclick="window.open(this.href);return false;