tam KT .. servo's ?

Feel free to discuss anything and everything to do with tanking here!
Post Reply
mcevoyi
2nd Lieutenant
Posts: 2294
Joined: Fri Sep 26, 2008 11:24 pm
Location: Now Living in Cyprus .... Modellers desart ...

tam KT .. servo's ?

Post by mcevoyi »

hi all

got my hands on the older tam KT 56004

and will fit a 4 channel radio gear ...

but can any recomend some servo ?????

iain
User avatar
Matdragon
Lieutenant
Posts: 3006
Joined: Sun Jul 20, 2008 9:58 pm
Location: United Kingdom
Contact:

Re: tam KT .. servo's ?

Post by Matdragon »

do you mean servo's for the gearboxes ? are you going to keep the orriginal dual clutch gearboxes ? you'd be best off switching them for some 3-1's ;)

cheers,

Matt
User avatar
Rocketman
Sergeant
Posts: 604
Joined: Tue Sep 30, 2008 5:17 pm
Location: Surrey Hills
Contact:

Re: tam KT .. servo's ?

Post by Rocketman »

Ive got the same Old 1970's KT. If its a clutch version you wont be able to use an RX18 or tammy control box.Ive got ACOMS in there and it works well but the main trouble is and CRISPY (will vouch for this) the engine in these eats batteries. Mine runs for around 10 minutes before the battery needs chopping out! Getting the clutch alinged Juuust right is a must and be careful where you spray the oil! The clutches can be finickity. If money allows think about ditching the oldgearboxes and put a dual box in

Image
mcevoyi
2nd Lieutenant
Posts: 2294
Joined: Fri Sep 26, 2008 11:24 pm
Location: Now Living in Cyprus .... Modellers desart ...

Re: tam KT .. servo's ?

Post by mcevoyi »

hi there rocket ..info taken on board ...

i will at some point chance the old gbox for a pair of new ones .. but just for now want to get it running so the info on the servos is most helpfull

thanks

iain
mcevoyi
2nd Lieutenant
Posts: 2294
Joined: Fri Sep 26, 2008 11:24 pm
Location: Now Living in Cyprus .... Modellers desart ...

Re: tam KT .. servo's ?

Post by mcevoyi »

Matdragon wrote:do you mean servo's for the gearboxes ? are you going to keep the orriginal dual clutch gearboxes ? you'd be best off switching them for some 3-1's ;)

cheers,

Matt
thanks matt ... will change out the gearboxs at some point .. but just want to get it running first

iain
User avatar
Rocketman
Sergeant
Posts: 604
Joined: Tue Sep 30, 2008 5:17 pm
Location: Surrey Hills
Contact:

Re: tam KT .. servo's ?

Post by Rocketman »

Does the old girl contain the Turret turn motors? bit of a weird set up. When you turned the tank teh turret turned! I disconnected mine!

Got any pictures if teh gizzards?

K
mcevoyi
2nd Lieutenant
Posts: 2294
Joined: Fri Sep 26, 2008 11:24 pm
Location: Now Living in Cyprus .... Modellers desart ...

Re: tam KT .. servo's ?

Post by mcevoyi »

it has like a nuttie motor with a wackie looking gear box sat in the hull which is atachet to the turret by a metal pole ....

will get a pic or two tomorw for you rocket
User avatar
Rocketman
Sergeant
Posts: 604
Joined: Tue Sep 30, 2008 5:17 pm
Location: Surrey Hills
Contact:

Re: tam KT .. servo's ?

Post by Rocketman »

Ok, what should happen is that there is a rod, that comes from the clutch servo arm. It's attached to a small two way circuit breaker. When you steer the tank, it moves the servo which moves the arm which activates the awitch which send ppower to the motor into the turret turn mechanism.

Simple really 8O
Post Reply

Return to “General Discussion”