DPDT Slide Switches

[STEINER]

I'm looking at fitting an in board charger to my Tiger. Can any one tell me whats the best type of switch to use. I was thinking of using a DPDT slide switch. I know you can get (correct me if I'm wrong ) 2 pole on/off or 3 on/off/on. Does it matter which one to use ? I probably will use a Deans charging connector as well.

Cheers.

STEINER.

[grim_marmazet]

I was also looking at doing this. I'm curious what switches people are using with their circuits.
Cheers,
Rik

[Saxondog]

I am also interested in how this is done,I would like to not have to open the hull every time I need to charge the battery.Saxondog

[jrc]

Here's the method I've been using for a couple of years without any problem and it uses the HL on/off switch but relocated somewhere better.
The best pace for the recharging socket on the Tiger is under the exhaust heatshield where it can't be seen.

[afv]

Howdoo i did this a while ago but removed it all after reading about batterys blowing up in the tanks.
used a dpdt switch, centre pole live and neutral, switch up powers the board, switch down connects the charger to the battery. Can't seem to get the pictures up

regards Jack

[afv]

Try again

[afv]

Try again

[afv]

Wrong way around, switxh up couples charger to battery, switch down puts power to the board
Jack.

[STEINER]

Jrc and afv thanks for this information its been a great help. I might be pm you for further info.

Cheers

STEINER

[Saxondog]

Same here thanks for the information,this is really the finale mod I need to finish the electrical components of my TIGER S-13.Blake