Hi
This is my first post so i hope it's in the right section.
I have fitted a smoking /light to my tiger one which is working great but the barrel does not recoil when using it on smoke and light. If i turn the smoke and light off then the barrel will recoil.
Anyone know a fix to get the barrel recoil ,smoke and light all working together.
ITS A HENGLONG TIGER 1 V7
Thanks.
recoil barrel problem
Forum rules
If your question is electronics related please post it in one of the relevant boards here: viewforum.php?f=31
If your question is electronics related please post it in one of the relevant boards here: viewforum.php?f=31
Re: recoil barrel problem
no, its the 7.0 board
-
ColemanCollector
- Warrant Officer 2nd Class
- Posts: 1341
- Joined: Sat Jan 14, 2023 8:50 pm
- Location: Ontario, Canada
Re: recoil barrel problem
Anytime some functions work and others don't, a good first troubleshooting task is to make sure the battery is taking a full charge and then fully charge the battery. Then check functions again. The boards will be erratic with a low charge and you'll get stuff like sounds but no movement, or only turns left, or turret turns but no forward, etc.
Mike.
Mike.
Elbows up
Re: recoil barrel problem
Thank mike
3300mah battery fully charged. its a strange one how everything will function but not together.
thanks for your input. i was thinking possible the way everything is plugged in to the board. maybe a re arrange of things.
3300mah battery fully charged. its a strange one how everything will function but not together.
thanks for your input. i was thinking possible the way everything is plugged in to the board. maybe a re arrange of things.
Last edited by leswado on Fri Jan 16, 2026 8:42 am, edited 1 time in total.
-
Kaczor
- 2nd Lieutenant
- Posts: 2399
- Joined: Fri May 18, 2018 9:58 am
- Location: Ciechanow, Poland
- Contact:
Re: recoil barrel problem
How is recoil solved in 7.0 because in 7.1 it's a servo.
Re: recoil barrel problem
Tiz a good question. I've got some answers but I'd like to see what the OP shares.
"Charlie don't surf"- Lt. Col. Bill Kilgore
Re: recoil barrel problem
I would open up the tank and provide some pictures of everything, how it’s hooked up, etc.
Can you provide a link or picture of the kit you used?
How are you turning the smoke and light on and off?
Is it gun smoke or exhaust smoke?
A TK7.0 can’t do servo recoil, unless you’re trying to Frankenstein one of the Taigen/Torro servo recoil kits into it. It should still be the recoil that is attached to the Airsoft plunger. Is the plunger still pulling back and shooting BBs?
Can you provide a link or picture of the kit you used?
How are you turning the smoke and light on and off?
Is it gun smoke or exhaust smoke?
A TK7.0 can’t do servo recoil, unless you’re trying to Frankenstein one of the Taigen/Torro servo recoil kits into it. It should still be the recoil that is attached to the Airsoft plunger. Is the plunger still pulling back and shooting BBs?
Re: recoil barrel problem
A la Dr. Frankenstein
Here's a video showing the converter used with a TK7.0 board to utilize the Servo for barrel recoil-https://youtu.be/gNiui-yYymc?si=FO1Ckd5XcukWDHTS
Unfortunately the part has been unavailable for some time-
https://www.rctank.de/Taigen-Signalwand ... hrrueckzug
https://heng-long-panzer.de/de/signalwa ... zteil.html
But I'm pretty sure the OP is talking about the HL airsoft "recoil" as they call it just as you are mentioning.
Another question did he jump CN6?
"Charlie don't surf"- Lt. Col. Bill Kilgore
