Torro tank being weird

[Deathcrusher]

Not to sure if i lost it or not but the final drive gear is missing a bearing entirely.

[tankme]

Not to sure if i lost it or not but the final drive gear is missing a bearing entirely.

Yup, had that happen also. The bearings they use are not the best quality. I've had one destroy itself.

[Deathcrusher]

Im going to reassemble it all and give it a test now if it still wont work im lost

[Deathcrusher]

I have fixed the issue but now i have noticed that the driving wheel on the left moves beyond what the gears move by like 0.5cm while the other side doesnt do this. Is there a easy fix for this or will i have to unscrew it all again? Thank you

[Deathcrusher]

Here is what is happening to the driving wheel on the left now.

[tankme]

That final gear may be press fit on the shaft or there is a pin holding it in place. I know I've drilled and tapped holes in the collar of that gear and added a grub screw to better secure it.

[Jofaur86]

Like my fellow members, I need photos to learn more. When you say the "Combined" is missing, I think you're referring to the radio? But are there any electrical components already? Such as motors for the tracks, turret rotation, etc.? As for brands: Heng Long, Taigen, Torro, etc. It's strange that it's empty.

[Deathcrusher]

Are you sure the trim has not been upset at some point?
The small knob on the top of the Transmitter on the right side . That will track the tank to one side is its been moved.
I dont get it, that thing is a good as it could be when I sent it back.

It would've occurred over the 7 times i used it for about 3 hours after you gave it back to me, i was driving it pretty hard to so its not unexpected the gearbox that i was thinking had issues finally stopped. As well the motor is loud but it isn't the motor its the gearbox, as i found out yesterday after doing some tests. But i have seem to have fixed it except for the video up top were the driving wheel rotates about 0.5cm past when the gears stop.

[Deathcrusher]

Well im not to sure what i did but simply unscrewing the gearbox and re-seating all the gears has fixed the issue. Just ignore the fact i put on the tracks wrong 3 times.

[Deathcrusher]

Took it for a test drive with the new heng long smoker i had to jam into it, and the motor actually died. No movement no anything just dead. The smoker works atleast i guess. Im starting to think the tank is REALLY cursed. Could only drive in circles.