Methods of base coat

[jfulls94]

Im just interested to see what you guys use. I personally use air brush but im finding it quite slow and painful for laying down the base coat. A

ny tips on any other easy to use methods and where to find them?

I.E. What is a good Rattle can alternitve for Dunkelgelb?

Sent from my SM-S921B using Tapatalk

[jarndice]

I get my Base coat from car accessory dealers in the shape of "Red Oxide", All German Armour in WW2 used it so why not use it as a base coat for all my armour? It comes in a large rattle can and it is cheap.

[Herr Dr. Professor]

I sometimes use a rattle can of RustOLeum red, other times the Vallejo primers (which I cannot distinguish from the Vallejo Model Air versions). The Vallejo primers lay on thinner and are increasingly becoming my preference for base finish coats, too.

[MrChef]

I prefer rattle cans at this point. I plan to try the Badger Stynylrez at some time soon with my airbrush but till then I prefer spray cans since they are much quicker and my hand doesn't cramp up and contort into a claw.

I've used Tamiya primer on a whim but decided the price ain't worth it. I could however see it's value on smaller scale tanks.

I've been satisfied with Rustoleum painters touch. That Flat Red is great Factory Red Oxide.



But recently tried this Rustoleum automotive primer that works well on metal, plastic and fiberglass. It's dumb cheap at $6.50 per can. Sprays great, fine mist, lays down smooth and levels well. Dries super quick, 15 minutes and it's sandable. Has a completely flat finish, And I love the dark gray color. It's literally the same color as Tamiya NATO Black.



I'va also read that Lacquer paints like the Tamiya colored spray cans are just fine without a primer because of the way the lacquer chemically bonds with the plastic.

The negatives to spray cans is convenience. I try to spray in good weather with lower humidity for better drying. Airbrush I can spray any time but it takes longer.

[jfulls94]

And what would you guys use for the main colour? That correctly represents the true colours of your tanks IE Dunkelgelb ect.

Sent from my SM-S921B using Tapatalk

[Martin2556]

I have had good results using the AK range of paints.
I tend to use just one range of paints for my models, less chance of incompatibility problems.
Rattle Can - DUNKELGELB SPRAY - Ref: AK1023
I have also used the Tamiya paints with good results but find the rattle cans too small for 1/16 models.
Happy Painting

[MrChef]

And what would you guys use for the main colour? That correctly represents the true colours of your tanks IE Dunkelgelb ect.

I use an airbrush for that now that I have one. Before I used rattle cans exclusively.

[HERMAN BIX]

Airbrush for all top coat & camo, oh, and tracks

[John Glover]

Wii the Rust-oleum stick well to a alloy hull.

[jarndice]

Rub the whole Tank including Turret, Body and (Metal) Hull with isopropyl alcohol/acrylic thinners and your paint will stick.