Selling some of my parts STL to detail models

[MonsieurTox]

Hey guys,

I'm putting up for sale some of the parts I designed through the years for my own models.
I'm going to put more in the future, for now they are mostly Sherman stuff and British.

You can find my page on Cults here : https://cults3d.com/@CaptainTox

I spent a lot of time designing these parts, most of the time I made the trip to Normandy to get access to real tanks and objects.

Churchill MK IV turret :

churchill_MKIV_AVRE_turret_1.jpg (480.23 KiB) Viewed 128 times

British 2 gallons petrol can :

2_gallons_petrol_cans_1.jpg (429.85 KiB) Viewed 128 times

British B167 ammo box (that I'm going to use on my new Churchill AVRE )

B167_1.jpg (385.28 KiB) Viewed 128 times

British G70 ammo box :

G70_1.jpg (453.56 KiB) Viewed 128 times

Churchill early track link based on a scan of a real link, it's workable and work fine for RC use if you use Sunlu toughness resin !

Churchillearlytrack_1.jpg (319.98 KiB) Viewed 128 times

British methyl bromide fire extinguisher as found on every WWII British AFV :

WWII_british_fire_extinguisher_1.jpg (321.96 KiB) Viewed 128 times

[MonsieurTox]

Sherman scoop, scanned on a real one :

scoop1.jpg (164.45 KiB) Viewed 125 times

Sherman hull lifting rings :

sherman_hull_lifting_ring_1.jpg (237.3 KiB) Viewed 125 times

Sherman lights (head lights and tail lights)

Sherman_lights_1.jpg (507.56 KiB) Viewed 125 times

Sherman NOS air cleaner :

Sherman_NOS_air_cleaner_1.jpg (321.76 KiB) Viewed 125 times

Sherman split hatch :

Sherman_commander_split_hatch_1.jpg (480.3 KiB) Viewed 125 times

[MonsieurTox]

German MG 34 42 Ammunition box :

German_MG_34_42_Ammunition_box_1.jpg (404.55 KiB) Viewed 125 times

German Karabiner 98K :

Karabiner98K_1.jpg (212.75 KiB) Viewed 125 times

German MP40 :

MP40-1.jpg (361.95 KiB) Viewed 125 times

[Tiger6]

That AVRE turret is most tempting...

I really hope that people don't start abusing your hard work and go into buisness for themselves. I can only imagine how many hours you have invested in not only producing the parts themselves, but also getting your skills and process up to the point where this is even possible to do.

[tankme]

Nice stuff. I followed you on Cults.

[MonsieurTox]

Nice stuff. I followed you on Cults.

Thanks Derek!

[MonsieurTox]

That AVRE turret is most tempting...

I really hope that people don't start abusing your hard work and go into buisness for themselves. I can only imagine how many hours you have invested in not only producing the parts themselves, but also getting your skills and process up to the point where this is even possible to do.

Thank you Tiger!
I tried to do my best to capture the shape and details of that turret. I did a second one recently for my other AVRE which is a bit different, casting number on the side, ventilator on top more centered and some other small difference but I just found out that the AVRE I want to depict has the same turret than the one I built.


I too hope people will respect the work and not do business with the parts and see them pop up on eBay, but we all know how it works and I don't have a lot of faith regarding that.