Returning to the Hobby

[TigerMouse1]

Welcome! I just recently joined the hobby and like Tigers too! I have a Heng Long (Early) and Taigen (Late) Tiger 1s. And I would say Taigen is my favorite! It's more expensive but I think it's well worth it!

[bullehs]

@Herr Dr. - vielen dank.
Here are the the pics that I took ages ago. Thanks for the responses.

PZ4_3.jpg (81.71 KiB) Viewed 381 times

PZ4_2.jpg (83.86 KiB) Viewed 381 times

PZ4_1.jpg (70.23 KiB) Viewed 381 times

PZ4.jpg (60.51 KiB) Viewed 381 times

I will look around for the kit in the UK. If I go the RTR HL way, presumably I would have to get the 7.1 as an upgrade after the purchase?

@TigerMouse1 - both looking great!

[Herr Dr. Professor]

"Presumably I would have to get the 7.1 as an upgrade after the purchase?" If you get a HengLong Tiger with a 7.0 do use it a bit first. I find the HengLong 7.0 with the stock transmitter quite fine for all my uses, with good slow running control and lots of control variations. In the past few years HengLong's newer TK 6.0, 7.0 and 7.1 have outdone Taigen in control and variety of running features. The only limit is that HengLong cannot match the variety of engine sounds Taigen offered, but the HengLong Tiger 1 sound is well done. What is more, Taigen seems to be asleep, so some of the firms that offered Taigen are selling HengLong, too while the U.S. Imex/Taigen is practically defunct for 1/16.

[michaelwhittmann]

Some beautiful tanks in this post. Here's an ugly Tiger.

[MrChef]

I will look around for the kit in the UK. If I go the RTR HL way, presumably I would have to get the 7.1 as an upgrade after the purchase?

The TK 7.1 is for servo control. The TK 7.0 is the same minus servo controls. If you don't have servos to control there's no advantage of the TK 7.1 over the 7.0.

[michaelwhittmann]

bullehs, where are you located?

Greetings from NJ, USA.

[Rob59]

Hi.
I believe far most of us started with a Tiger 1 ?
So did I, back in 2018, and by now I do have 4 of these beasts.
Going from an Initial Production, to an Early, Mid and a Late Version.
3 of them are Taigen, and the Middle Version is a Torro one which doesn‘t run and is used as a deco only in photo shoots.
The HL 6.0-7.0 boards do run very smooth compared to the Taigen boards.
Maybe I do rebuild mine one day when I have nothin else to do….?

IMG_9015.jpeg (2.59 MiB) Viewed 310 times

IMG_3916.jpeg (265.2 KiB) Viewed 310 times

IMG_9031.jpeg (2.94 MiB) Viewed 310 times

[bullehs]

Wow! Some nice looking Tigers!
Thanks for all the advice. I'm in London, UK.

[Jimster]

viewtopic.php?t=26614
Here’s my Tiger journey. Long thread but might be of interest to you.
And a fun little video of “Ol’ Ugly” https://youtu.be/Qx0DFZNpU9w?si=Iv-bBeDSD8CTKuPY

[PainlessWolf]

Good Afternoon!
1stly, Welcome to the Forum. Then Tigers is it? A Great choice of tank to build. RTR and Kits and 3D printing and PE provide a wealth of ways to model any Tiger from the War.
Here are a couple of my examples. A Tamiya Tiger build for a Friend and a Combo RR and Kit Late Tiger Build from a Friend for me to update. Looking forward to yours!
regards,
Painless

TX and completed Tiger.JPG (128.05 KiB) Viewed 199 times

Tigers are huge tanks in any scale and difficult to get in detail on any one picture..jpg (270.42 KiB) Viewed 199 times