1/16 King Tiger Tamiya Help

[Jofaur86]

Hello, effectively replaced the bronze rings with bearings, on the entire running gear (purchase on eBay) plus the dimensions in mind? also for the turret rotation, with adaptation, replacing plastic rollers, photos attached, for many modifications
roller bearings

IMG_4371.jpeg (66.16 KiB) Viewed 1162 times

1.5 mm aluminum turret vase reinforcement

IMG_4375.jpeg (119.24 KiB) Viewed 1162 times

Upper chassis reinforcement

IMG_4383.jpeg (68.49 KiB) Viewed 1162 times

IMG_4376.jpeg (73.04 KiB) Viewed 1162 times

[Jofaur86]

Suite:

IMG_4376.jpeg (73.04 KiB) Viewed 1160 times

A friend also made me brass parts to reinforce the axles.

IMG_4372.jpeg (46.4 KiB) Viewed 1160 times

IMG_4373.jpeg (36.31 KiB) Viewed 1160 times

There were other modifications, because originally a model with a single engine,

[John Glover]

Excellent Mr Jofaur Hopefully all the questions have been answered. regards John.

[Michael151722]

Excellent Mr Jofaur Hopefully all the questions have been answered. regards John.

Hello,

Thank you thank you for your help and also thank you to Jofaur and everyone who has helped!

Thank you

[Jofaur86]

For bearings ? plus the reference ? just measure the dimensions of the axles and housings, and see on eBay
Here, if I can help? It's great, as a gift some additional photos, interior design
Platine Radio

IMG_4381.jpeg (54.68 KiB) Viewed 1007 times

IMG_4384.jpeg (81.81 KiB) Viewed 1007 times

IMG_4385.jpeg (84.9 KiB) Viewed 1007 times

R

IMG_4374.jpeg (44.55 KiB) Viewed 1007 times