Infos radios

[Jofaur86]

FSi6X, that's what I'm considering, reasonable price, possibility of 10 channels? if I believe what I've read this evening, and I think it's quite simple to program, with many videos viewed. So a very big thank you to you, for all that. Have a good weekend, with pleasure Professor

[Jofaur86]

Hello, I come back to a question asked post electronics? of which I have no idea what to do? on a Flysky TH 9X radio flashed ER9x, I have the following problem: screen lights up, but no display, it happened, when I tried to modify settings, and then press settings buttons? certainly made a mistake? but admit that I do not know what to do anymore, and I am very bored, because no one to help me in my area. So if someone, had an idea (possible?) I am a taker. Thank you in advance.

[tankme]

Sorry, I'm more of a mechanical guy. Radios aren't my thing. Rad is the radio God, but of course he's in recovery.

[Jofaur86]

Thanks anyway for the answer, yes let's let our friend Rad regain his strength, and I won't allow myself many other worries either... I have the solution to invest in a simpler model, even if it annoys me? For now, I'm going to take a break Seems difficult to get answers Good Day

[Jib]

Sorry I don’t have any advice for your specific problem, but I’ll second Jimsters recommendation of the TX16S. I went from the preprogrammed transmitters to the FlySky i6x and then to the TX16S.

It was quite the jump in things to learn (I had to watch a LOT of YouTube videos) from the FlySkyTX, but I really love it now. It’s very easy to set up new models and after I downloaded the firmware file to my phone I can flash the RX (I use the ER8) directly from my iPhone.

[Jofaur86]

Hello and thank you "Foc" for your answer, I'm really not good at programming
It's a bit of a drag, I'd like to get there, but my brain doesn't print well? despite many youtube videos and internet readings?

[Jofaur86]

Regarding my flashed ER9x radio, which no longer displays anything, but seems to light up? I can't figure out what I did wrong that would have blown the programming? Basically I would say it's like going from a scooter to an F1 without having taken any driving lessons? Maybe I should go back to an RX 18 module?

[Jib]

Is there a way to reset the radio to factory settings so you can just start from scratch and re-do everything? It might be a pain in the butt, but if something got messed up with the software it might be the only way forward.

[Jofaur86]

I don't know? I thought about it, because I wonder what could have happened? It no longer has (I think?) factory settings, having been "Flashed" ER9x? I think I pressed one of the right/left buttons and at the same time on Exit, but that's just a guess? I made several attempts at settings, to try put back into service, but afraid of making the problem worse? No new attempts, no worsening of the situation. Thank you for your support