Infos radios

[Jofaur86]

Hello everyone, following radio TX problems, which I can't find the problem with?? I'm considering replacing it? My only problem is the programming? I'm totally permeable to that, or else it must be simple!!! Minimum 6 channels? 8/10 would be great, and possible to assign certain functions on switches, for a TK 24? I had a FST 6 in the past, I use? well should I say? I'm considering Elmod (old) and Tam. So any good advice, for a very slow brain, would be welcome
Thanks in advance.

[Jofaur86]

Following my request for advice on a new radio? I will explain my problem... On my Flysky TH9X flashed ER9x, wanting to program a new model? I think I made a mistake..... it started with the fact that no servo reacted to the sticks?? the RX light only lights up when the TX is running? After several restart attempts, I don't know where to put my big finger but since then despite (I think?) the screen lights up, but does not display anything?? so if you have an opinion, a solution? I'm interested!!! otherwise it will be the replacement (annoys me a little!!!) in advance thanks for your possible help.

[Herr Dr. Professor]

Let me bump attention to your request, Jofaur86. You have my useless sympathy. I wish I could help, but as you know, I am slow to learn about electronics. I would like to use my FlySky i6X more, but the steps to making any change are tricky and confusing. grumble grumble, fuss fuss...

[Jimster]

Radiomaster TX 16S MK ll. Buy one and thank me later.

[Jofaur86]

Hello and thank you Jimster, I am completely overwhelmed (to my great regret) for any radio programming? I spent entire evenings trying to understand?? nothing works.... Sometimes I want to stop everything, all alone in my corner, I have no other solution but to beg on the forum??? which saddens me by the way? but hey. I will see if there are other opinions? otherwise I will return to a simpler system, have a good day.

[Jofaur86]

Thank you Mr. Professor, for your moral support!!! Indeed all this is very complicated, I try to read the instructions properly, watch videos? I tell myself that it must not be difficult? Well no, my brain blocks I admire on this forum, all the members who succeed or it's age or not following the game, but hey that's how it is.

[Jofaur86]

Hello, does anyone have any possible ideas to resolve my problem Try again? Still the same? As if the memory had been erased? How is this possible?

[Herr Dr. Professor]

Jofaur86. Although it seems unlikely, perhaps there's a slight chance one of these could be of some help. I dug through all the URLs I have bookmarked on setting up electronics, especially my FlySky iX6. Here's what I have.


FlySky RC: https://www.flysky-cn.com/0enhome
Setting up a FlySky Transmitter: https://www.youtube.com/watch?v=kKgV3LhAwVo
Binding a FlySky receiver: https://www.youtube.com/watch?v=v5SXRkQMgkA and https://www.youtube.com/watch?v=msGpx8vEHsQ
FlySky with two motors set up: https://www.youtube.com/watch?v=sIgX9P8l8kw
Mato 2.4G Binding: https://www.youtube.com/watch?v=d--E0rEaQ_A
Setting up a Clark TK20: http://www.clark-model.com/eng/prod_rx20_tu/index.html

[Jofaur86]

Good evening Her Professor, and a big thank you for your links there is one that interests me particularly ... it is true that it is a bit difficult to obtain answers? that is why I appreciate yours all the more what type of radio do you use? 6 or 8 channels? Because I'm thinking of buying a simpler one.

[Herr Dr. Professor]

I use a FlySky iX6, six channel, for any AFVs or softsided vehicles in which I have put electronics (mostly Will and Catherine's WCP). I also use FlySky receivers.