Sd.Kfz. 251 Ausf.D by Warprints - 1/16 scale

[50koruny]

3D printing is still evolving.
It is now possible to buy a printer that is not too expensive and can print almost indestructible nylon easily (Bambulab P1S).
As for resin printers, today there are extremely durable resins like Siraya Blu.
There are cheap and very large resin printers under $200 with good quality.

It hasn't always been like this.
We used to have only filament printers that could only do PLA and ABS (and ABS extremely difficult).
Today it is completely different.
Also in terms of ease of use.
Definitely recommended...

But I warn you, it's quite addictive.

[50koruny]

Here are some new videos.

In the first one you can see the possibilities of new materials for 3D printing.
Significantly more durable than injection moulded styrene.
That's why I always say that converting a static model to an RC model is not the way to go.At least not for me.

phpBB [video]

The second video shows the door locking.
Same as on the original vehicle.
The only difference is that I didn't get small enough springs.
Those are missing and won't be there - they will only be on the 1/6 scale version.

phpBB [video]

[Kaczor]

Amazing details. It's flexible resin?

[50koruny]

Thank you.
No, its Siraya Blu.

[50koruny]

Some new pictures:

IMG_20240719_193638.jpg (440.09 KiB) Viewed 2355 times

IMG_20240719_193056.jpg (214.51 KiB) Viewed 2355 times

IMG_20240719_193022.jpg (267.69 KiB) Viewed 2355 times

IMG_20240719_192917.jpg (378.63 KiB) Viewed 2355 times

IMG_20240719_192754.jpg (188.17 KiB) Viewed 2355 times

IMG_20240719_192658.jpg (220.51 KiB) Viewed 2355 times

IMG_20240719_192603.jpg (350.51 KiB) Viewed 2355 times

IMG_20240719_192507.jpg (516.62 KiB) Viewed 2355 times

IMG_20240719_192429.jpg (393.33 KiB) Viewed 2355 times

IMG_20240719_192312.jpg (366.74 KiB) Viewed 2355 times

IMG_20240719_192000.jpg (298.29 KiB) Viewed 2355 times

IMG_20240719_191905.jpg (390.13 KiB) Viewed 2355 times

IMG_20240719_191833.jpg (289.16 KiB) Viewed 2355 times

IMG_20240719_191602.jpg (298.37 KiB) Viewed 2355 times

IMG_20240719_191548.jpg (223.22 KiB) Viewed 2355 times

[50koruny]

IMG_20240721_142415.jpg (423.61 KiB) Viewed 2355 times

IMG_20240721_142356.jpg (389.23 KiB) Viewed 2355 times

IMG_20240721_143520.jpg (265.02 KiB) Viewed 2355 times

IMG_20240721_143455.jpg (645.48 KiB) Viewed 2355 times

IMG_20240721_143350.jpg (392.88 KiB) Viewed 2355 times

IMG_20240721_143123.jpg (1.17 MiB) Viewed 2355 times

IMG_20240721_142815.jpg (428.35 KiB) Viewed 2355 times

IMG_20240721_142746.jpg (417.46 KiB) Viewed 2355 times

IMG_20240719_191730.jpg (251.38 KiB) Viewed 2355 times

[HERMAN BIX]

Extraordinary work

[tankme]

Extraordinary work

Agreed...

[Herr Dr. Professor]

Atop all of the excellence in your model, 50koruny, the interior is stunning. As just one example, I feel as if I could actually move the brake release.

[MonsieurTox]

Fantastic achievment, you got a wonderful Sd Kfz 251 !