King Tiger 1 ere generation

[Ecam]

I so want to play with the single motor dual clutch gearbox (Sassgrunt supplied me with one). But simply stated the new stuff if so much better. I love the mechanical portion of these builds (my soon to be announced cooperative build with Monsieur Tox should explain).

[Jib]

Yeah I was going to replace it with some Torro gearboxes, but it’s just so neat, and I already have a Torro KT already, so I’m going to try to leave it.

[Ecam]

Dude (my California raising) please do what you will! Some day I will figure out the right way to use that gear box.

[Jofaur86]

Hello, personally I kept it in a safe place, because it is a beautiful mechanism

[Jofaur86]

for information, and in post download of this Forum "assembly instructions "KT first generation"
https://www.rctankwarfare.co.uk/downloa ... h=c98762b7

[Jofaur86]

Hello, following the construction of the Tam, first generation, attached below, I had imagined a setback and elevation by servos? finally chosen made easier, using the Tam. System .

IMG_3847.jpeg (71.57 KiB) Viewed 1103 times

IMG_3828.jpeg (68.85 KiB) Viewed 1103 times

the rear part has also been lined with 1.5 mm aluminum

IMG_3850.jpeg (118.23 KiB) Viewed 1103 times

[Jofaur86]

creation of underwings, PVC corners

IMG_3851.jpeg (129.46 KiB) Viewed 1102 times

IMG_3850.jpeg (118.23 KiB) Viewed 1102 times

transom reinforcements

IMG_3856.jpeg[/attachment [attachment=0]IMG_3822.jpeg

[Jofaur86]

the aluminum part is protected with tape, to avoid scratches

[Jofaur86]

replacement of exhaust pipes with 8 mm brass in order to have the possibility to install smoke generator

IMG_3830.jpeg (69.4 KiB) Viewed 1095 times

IMG_3831.jpeg (63.43 KiB) Viewed 1095 times

[Ecam]

the aluminum part is protected with tape, to avoid scratches

Fabulous work on the exhaust! But avoiding scratches on a 16th battle tank (not in my wheelhouse).