Hi Herman
The kit is as follows:
Lower hull as seen . The chassis will need
Stug 3 or Panzer 3 gearbox covers
Gearboxes to your choice
Stug 3 or Panzer 3 sprockets
Panzer 4 Idler wheels and screws - the latest hull has these so not required
Tracks - because of the extended chassis you will need an extra 6 links per side, plus some extras if you want to put spare tracks on the front glacis
There will not be any wiring/electronics at all with the chassis so all that will be needed. Personally I would recommend either the IBU2 pro or IBU3 but beware that space in the hull is limited so check on fit before buying. If you go for the IBU option then I would recommend using a slew servo in place of the motor I will be providing. Carl is using the Clark TK60 and slimline battery which fits.
Upper hull as seen in the kit thread including ammo cabinets and rear tool box which are included but not glued/fastened to facilitate painting. Front light, jack, and jack pad not included. A gun slew motor will be fitted with corresponding arm and linkage for slewing the gun assembly The hull will be unpainted.
PAK43 gun in complete form and unpainted. Some filling/sanding/finishing will be required depending on your personal taste, and will obviously need painting so some disassembly/reassembly will be required. The gun will come with recoil and elevation servos and links fitted.
Basically what you see in the Nashorn Kit thread
viewtopic.php?f=23&t=21789
is what you would get. All the finishing/painting and fitting electronics/gearboxes/idler wheels/tracks etc is down to buyers preference.
That's basically it. You can see what can be done in my Nashorn thread.
viewtopic.php?f=22&t=20527
The cost of the kit as described above is £295 plus postage.
I'm not sure what the postage would be to the Antipodes but I can do some research.
Alwyn
