Gig's 1:16 FCM F1
- tankme
- Warrant Officer 1st Class
- Posts: 2049
- Joined: Tue Oct 31, 2017 3:51 pm
- Location: Elgin, TX
- Contact:
Re: Gig's 1:16 FCM F1
Am I the only one that can't see the image of the gearbox?
Derek
Too many project builds to list...
Too many project builds to list...
- Son of a gun-ner
- Lieutenant-Colonel
- Posts: 7145
- Joined: Sun May 07, 2017 8:49 pm
- Location: Surrey UK
Re: Gig's 1:16 FCM F1
No, not even the Candy Man can.
- Attachments
-
- Screenshot_20240514-093213.jpg (11.6 KiB) Viewed 207 times
Mick - The grit in the underpants of life!
And always happy to spare the bytes
TOTM needs YOU
support YOUR TOTM competition, I'm doing my part, are YOU?
And always happy to spare the bytes
TOTM needs YOU
![Thumbup :thumbup:](./images/smilies/icon_thumbup.gif)
- Ecam
- Warrant Officer 1st Class
- Posts: 1589
- Joined: Sun Jul 13, 2014 6:30 pm
- Location: Lake of the Ozarks, USA
Re: Gig's 1:16 FCM F1
That's odd, because I can still see the image, unless there is some magic that my computer is doing ...
and it shows up in this posts' preview...
"Don't believe everything you see on the internet" - George S. Patton
Eric
Eric
Re: Gig's 1:16 FCM F1
Probably disappears if you refresh your browser cache?
Re: Gig's 1:16 FCM F1
redesigning the interior with better bulkheads and new component sizes like the control board. smoke unit and speakers
![Image](https://media.discordapp.net/attachments/1235801148439662602/1243348857958436994/image.png?ex=6651265c&is=664fd4dc&hm=a27900c47c7a51651bbcb8e0cec5f719076b0a69fab186335745c2f7564a3377&=&format=webp&quality=lossless&width=1439&height=507)
since the shafts were abit short, i made an extender piece for the long screw to be in and grab in one piece
![Image](https://media.discordapp.net/attachments/1235801148439662602/1243348989412376646/image.png?ex=6651267b&is=664fd4fb&hm=4cfd79d8ad7aa45025e9bc90db77cd96026a660a2dbaad6f70f03827bc5d8996&=&format=webp&quality=lossless&width=494&height=283)
look at the amount of space internally. and this is just the middle hull and not the sponsons.
![Image](https://media.discordapp.net/attachments/1235801148439662602/1243352681146224662/image.png?ex=665129eb&is=664fd86b&hm=75587c10620d0f8fe95f55f5aa30dc62961addc38b58fd3fa636c5f21fa7064e&=&format=webp&quality=lossless&width=257&height=675)
![Image](https://media.discordapp.net/attachments/1235801148439662602/1243348857958436994/image.png?ex=6651265c&is=664fd4dc&hm=a27900c47c7a51651bbcb8e0cec5f719076b0a69fab186335745c2f7564a3377&=&format=webp&quality=lossless&width=1439&height=507)
since the shafts were abit short, i made an extender piece for the long screw to be in and grab in one piece
![Image](https://media.discordapp.net/attachments/1235801148439662602/1243348989412376646/image.png?ex=6651267b&is=664fd4fb&hm=4cfd79d8ad7aa45025e9bc90db77cd96026a660a2dbaad6f70f03827bc5d8996&=&format=webp&quality=lossless&width=494&height=283)
look at the amount of space internally. and this is just the middle hull and not the sponsons.
![Image](https://media.discordapp.net/attachments/1235801148439662602/1243352681146224662/image.png?ex=665129eb&is=664fd86b&hm=75587c10620d0f8fe95f55f5aa30dc62961addc38b58fd3fa636c5f21fa7064e&=&format=webp&quality=lossless&width=257&height=675)
Heng Long tanks:
KV-1E
KV-2 MT-1&2
M41
King tiger
Jagdpanther
IJA Type 5 heavy 160ton (to be 3d printed)
FCM F1 (awaiting electronics)
Jagdpanzer E-100 (3D printing in progress)
KV-1E
KV-2 MT-1&2
M41
King tiger
Jagdpanther
IJA Type 5 heavy 160ton (to be 3d printed)
FCM F1 (awaiting electronics)
Jagdpanzer E-100 (3D printing in progress)
Re: Gig's 1:16 FCM F1
regarding about the images not showing up its possible issue could be with discord's media linking
Heng Long tanks:
KV-1E
KV-2 MT-1&2
M41
King tiger
Jagdpanther
IJA Type 5 heavy 160ton (to be 3d printed)
FCM F1 (awaiting electronics)
Jagdpanzer E-100 (3D printing in progress)
KV-1E
KV-2 MT-1&2
M41
King tiger
Jagdpanther
IJA Type 5 heavy 160ton (to be 3d printed)
FCM F1 (awaiting electronics)
Jagdpanzer E-100 (3D printing in progress)