Heng long leopard 2A6 7.0 quick build

[Mr tank a lot]

Thank you for another excellent tutorial.

Thanks! And sorry for not getting back sooner, had a nuts amount of work on.

[Mr tank a lot]

Hi all!

The next 2 bits, to bore the living bananas out of you!



https://youtu.be/9M7A3leaJ3I?si=0uDaTrhb-fCO3vHs

https://youtu.be/ung8zzD1KYg?si=PldHu7bXALD_P-ma

[Herr Dr. Professor]

Just to let you know somebody's paying attention, a subscriber, I have been watching this "build" all along, so will check 'em out a.s.a.p.

[Mr tank a lot]

Dear All

Happy new year! And here’s the next bits, hope your all very well, and a running vid to show that I think the final drive bearings help?!?!

BEGINNERS GUIDE, HENG LONG LEOPARD 2A6 7.0, MIG PIN WASH & OILBRUSHERS TUTORIAL #howto
https://youtu.be/vWLRJ0WR6-c

Running vid

HENG LONG LEOPARD 2A6 7.0 TEST RUN, MUD, GRASS, & DEEP PUDDLES. ALL PLASTIC, & FINAL DRIVE BEARINGS
https://youtu.be/STW3DpAjIhU

[Herr Dr. Professor]

I wouldn’t be surprised if someone from HengLong were to contact you about using your video. You make me want to follow your tips and take on a modern tank build after I finish the T26E3 and FAMO.

[MrChef]

I'll say it again. Great work. You put into video format explaining the way I went about treating and weathering my first tanks. I watched a lot of armor modeling you tube vids to teach and guide me.

Thank you for taking your time and effort to do this for others. What a great way to promote the hobby to newcomers and others who haven't hopped the fence yet.

Maybe the video should have a warning that once you start, it becomes a snowball rolling down a steep slippery slope.

[Meter rat]

Thank you for another informative video. I’m very tempted to buy a basic Leopard and have a go at your methods.

[fullysemiautomatic]

You did a great job on this paint job . I am tackling this as a noob, and I was trying to do the headlight mod and messed up my headlights. I also tried to coat it clear flat, and it totally messed up the finish. I tried to do windows, and the acrylic I bought will not snap easily after scoring it. So I am using a dremel to shape every window.

I wish I could make this thing look as nice.

On a side note, I found out that mineral spirits will not destroy the plastic or the factory paint; however, acetone will.

[Meter rat]

You did a great job on this paint job . I am tackling this as a noob, and I was trying to do the headlight mod and messed up my headlights. I also tried to coat it clear flat, and it totally messed up the finish. I tried to do windows, and the acrylic I bought will not snap easily after scoring it. So I am using a dremel to shape every window.

I wish I could make this thing look as nice.

On a side note, I found out that mineral spirits will not destroy the plastic or the factory paint; however, acetone will.

Welcome fullysemiautomatic.
Good of you to join us, but it is the polite thing to do, is an introduction, in the introductory section first. It’s a very British thing. This is to encourage you to participate, and we can help with answers. So I have read that you are newby, but fear not you will be helped.

[Mr tank a lot]

I wouldn’t be surprised if someone from HengLong were to contact you about using your video. You make me want to follow your tips and take on a modern tank build after I finish the T26E3 and FAMO.

Hi! The modern stuff is kinda rewarding, and you have less to break on it, if you know what I mean!
I really want to work out the gun stabilisation stuff!
Sorry I’ve taken ages to get back.