Hi everyone! I hope I am posting this at the proper place at this forum.
The speaker on my Heng Long T-90 tank gave up its ghost after just a few times running the tank. As far as my limited research online goes this seems to be a rather common issue with the Heng Long tanks equipped with 7.0/7.01 boards.
I want to remedy this with buying a replacement speaker of a higher quality than the versions Heng Long seems to offer. The Visaton speaker compatible with Heng Long tanks seems to be a good alternative, but I would like to know what you knowledgeable people on this forum believe would be a good replacement for the ruined oem speaker. All suggestions are welcome!
Need help replacing a blown speaker on Heng Long t-90 tank!
-
- Staff Sergeant
- Posts: 881
- Joined: Sat Jan 14, 2023 8:50 pm
- Location: Ontario, Canada
Re: Need help replacing a blown speaker on Heng Long t-90 tank!
You've probably done this already, but have you unplugged and plugged back in the speaker? The connectors are not top qualiy and can wiggle loose, or develop a poor connection in the plug connector. Once plugged in, if there's no sound, try wiggling the wires to see if can get anything from the speaker.
Mike.
Mike.
- HERMAN BIX
- Major-General
- Posts: 10691
- Joined: Sun Jan 12, 2014 12:15 am
- Location: Gold Coast,Australia
Re: Need help replacing a blown speaker on Heng Long t-90 tank!
Vr 7 4 ohm
HL JAGDPANTHER,HL TIGER 1,HL PzIII MUNITIONSCHLEPPER, HL KT OCTOPUS,HL PANTHER ZU-FUSS,HL STuG III,HL T34/85 BEDSPRING,
HL PZIV MALTA,MATORRO JAGDTIGER,HL F05 TIGER,TAMIYA KT,HL PANTHERDOZER,HL EARLY PANTHER G,TAIGEN/RAMINATOR T34/76,
HL AN-BRI-RAM SU-85
HL PZIV MALTA,MATORRO JAGDTIGER,HL F05 TIGER,TAMIYA KT,HL PANTHERDOZER,HL EARLY PANTHER G,TAIGEN/RAMINATOR T34/76,
HL AN-BRI-RAM SU-85
Re: Need help replacing a blown speaker on Heng Long t-90 tank!
Great suggestion, I will try that! I will probably try to get my hands on a better quality speaker anyway, but surely I will give your method a try.ColemanCollector wrote: ↑Thu Nov 23, 2023 5:50 pm You've probably done this already, but have you unplugged and plugged back in the speaker? The connectors are not top qualiy and can wiggle loose, or develop a poor connection in the plug connector. Once plugged in, if there's no sound, try wiggling the wires to see if can get anything from the speaker.
Mike.
Re: Need help replacing a blown speaker on Heng Long t-90 tank!
Very interesting, thanks for trying to help me out with the issue described above. Will these fit the T-90 tank?forgebear wrote: ↑Thu Nov 23, 2023 6:08 pm if you like you can try our speaker
https://www.forgebeartanks.com/store/p1 ... ker_B.html
- forgebear
- Warrant Officer 1st Class
- Posts: 1820
- Joined: Fri Nov 21, 2008 11:15 pm
- Location: bedford
- Contact:
Re: Need help replacing a blown speaker on Heng Long t-90 tank!
hi yes they will made by heng long but they dont place them in there tanks only the older ones
Re: Need help replacing a blown speaker on Heng Long t-90 tank!
For now I have opted for a direct replacement for the Heng Long speaker. It will be interesting to see how long this one will last
- Attachments
-
- IMG_20231216_150803.jpg (2.49 MiB) Viewed 12299 times