Tamiya M4A3E8 Up armoured
Tamiya M4A3E8 Up armoured
Must be something wrong with me, I’ve got another Sherman
Picked up a nice full option Sherman.
Then this happened… Nick Aguilar cast hull
And now an Andy’s Hobby HQ T23 turret.
Sent from my iPhone using Tapatalk
Picked up a nice full option Sherman.
Then this happened… Nick Aguilar cast hull
And now an Andy’s Hobby HQ T23 turret.
Sent from my iPhone using Tapatalk
- Ecam
- Warrant Officer 1st Class
- Posts: 1562
- Joined: Sun Jul 13, 2014 6:30 pm
- Location: Lake of the Ozarks, USA
Re: Tamiya M4A1E8… again
That looks a lot like the unidentified hull I used on my M4A1. Mystery solved! I'll be watching this thread. Did the bike come with it? Nice touch.
"Don't believe everything you see on the internet" - George S. Patton
Eric
Eric
Re: Tamiya M4A1E8… again
Cool! I cant wait to see how you set up the Andy's turret. I bought the kit in hopes of mating the top to a Tamiya lower...the hull fits and thats as far as I have got. LOL
Re: Tamiya M4A1E8… again
Yep - Nicks stuff is great but getting scarce.
Yes, the bike came with it, along with all the stowage etc. not a bad build overall.
Re: Tamiya M4A1E8… again
Been playing with the recoil and elevation today, should have a few photos over the next week or two showing progress.
Re: Tamiya M4A1E8… again
Side skirts from the AHHQ kit bonded on the cast hull using plasticard strip.
Turret taking shape - used a Tamiya Pershing recoil and stay to fix to the AHHQ mantlet using brass standoffs and screws through the mantlet.
Elevation should work as well as I have used the Tamiya Sherman elevation bracket.
Sent from my iPhone using Tapatalk
Turret taking shape - used a Tamiya Pershing recoil and stay to fix to the AHHQ mantlet using brass standoffs and screws through the mantlet.
Elevation should work as well as I have used the Tamiya Sherman elevation bracket.
Sent from my iPhone using Tapatalk
Re: Tamiya M4A1E8… again
Anybody know where to get a suitable barrel for a 76mm Sherman?
- Conan_the_Hungarian
- Recruit
- Posts: 15
- Joined: Fri Apr 26, 2019 1:17 pm
Re: Tamiya M4A1E8… again
You might be able to find the one used in Andy's Hobby HQ E8 online on EBay. I purchased separate sprues from the same kit off eBay to rebuild a Tamiya M4 rear deck. I'm also converting my Tamiya M4 into an E8 using Andy's M4A3E8 upper chassis and turret. Using the Tamiya Pershing recoil and gun elevation. Very interested in how you plan to tackle the turret rotation.
Re: Tamiya M4A1E8… again
I have the barrel from the Andy’s kit, it’s not hollow and a bit thin so can’t drill it and add recoil.
Sadly the turret is a bit on the large side to fit in the cast hull shot ring and rubbing is an issue.
Rotation is easy - screwed on the sherman 105mm rotation plate.
Sadly the turret is a bit on the large side to fit in the cast hull shot ring and rubbing is an issue.
Rotation is easy - screwed on the sherman 105mm rotation plate.
- PershingLover
- Corporal
- Posts: 309
- Joined: Thu Dec 05, 2019 11:37 pm
- Location: Sweden
Re: Tamiya M4A1E8… again
Did you purchase the entire kit from Andy? It's the first time I've seen one