Gear box removal

[Meter rat]

Good morning,
Working through the suspension on the Challenger and installing stiffer springs on the front and rear road wheels, I am trying to work out how to remove the gear box. There appears to be screws coming from the bottom, but not showing on the lower hull.

image.jpg (2.64 MiB) Viewed 1856 times

image.jpg (2.66 MiB) Viewed 1856 times

Thanks in advance advance.
Ian

[Kaczor]

Open plastic covers, there should be one or two more screws holding gearbox.

[tankme]

The screws that look like they are coming from the bottom of the gearboxes are only holding the gearbox pieces together and not holding the gearboxes to the tank. Only the top accessible screws are holding the gearboxes in (usually 3 or 4 of them per gearbox).

[Jofaur86]

Good morning,
I join Kaczor, and Tank me, have you removed the plastic lids? as Tank says me? there are generally screws inside, and as on the attached photo, in green for assembly, in red for fixing, do not forget to remove the tracks, and the drive sprockets

IMG_2832.jpeg (1.03 MiB) Viewed 1819 times

[Meter rat]

Good morning,
I join Kaczor, and Tank me, have you removed the plastic lids? as Tank says me? there are generally screws inside, and as on the attached photo, in green for assembly, in red for fixing, do not forget to remove the tracks, and the drive sprockets

IMG_2832.jpeg

Open plastic covers, there should be one or two more screws holding gearbox.

Thank you all for your help. I didn’t realise the plastic covers needed removing.