Need help...My tamiya leopard2a6 cannot steering after I change the RC unit from Futaba to fly sky FS-I6S. Throttle is working and all other functions are ok . I don't know what's wrong.
Thanks
tamiya leopard2a6 steering problem
Forum rules
If your question is electronics related please post it in one of the relevant boards here: viewforum.php?f=31
If your question is electronics related please post it in one of the relevant boards here: viewforum.php?f=31
Re: tamiya leopard2a6 steering problem
Silly question, but is the lead from the MFU to the receiver plugged in the right way round - eg the black wire same end as the other leads? I have done that mistake a couple of times
-
- Warrant Officer 1st Class
- Posts: 2172
- Joined: Tue Dec 25, 2018 11:28 pm
- Location: Centre France
Re: tamiya leopard2a6 steering problem

see also, in the menu of the radio? if a function is deactivated, the channel function is not the same on all receivers, depending on the brand!!
Re: tamiya leopard2a6 steering problem
Changing radios, you should go back through the entire calibration routine in the manual of Tamiya tank.
Derek
Too many project builds to list...
Too many project builds to list...
-
- Warrant Officer 1st Class
- Posts: 2172
- Joined: Tue Dec 25, 2018 11:28 pm
- Location: Centre France
Re: tamiya leopard2a6 steering problem

-
- Warrant Officer 1st Class
- Posts: 2172
- Joined: Tue Dec 25, 2018 11:28 pm
- Location: Centre France
Re: tamiya leopard2a6 steering problem

with a programmable radio, it is possible to get around this problem
-
- Warrant Officer 1st Class
- Posts: 2172
- Joined: Tue Dec 25, 2018 11:28 pm
- Location: Centre France
Re: tamiya leopard2a6 steering problem

The DMD control unit is designed foruse with 4-channel ra- d i o s v s t e m s f o r s u r t a c e v e n i c l e s . M u l t - c h a n n e lm o r e t h a n
5 channel) radio systems for helicopters and aircraft may , not be Used, not agree
