Plug size identification.

[Model Builder 4]

Morning all,

I'm hoping someone may be able to clarify the size of the 2 pin connector I need for the port I've arrowed on the picture of the Clark board below.
I'm thinking it's possibly the one in the other picture being ( jst 1.25 ) I know there are a few different sizes of jst plugs and the smallest one's that I have are from the heng long truck boards which are pretty small but they are still too big as the one on the Clark board is tiny so I wanted to check first as I would consider it the smallest it could be
I'd appreciate any help or info

Cheers,Lee.

[tankme]

It is the ones you have pictured. I bought these from Amazon and they work in that port:

[Model Builder 4]

Thank you tankme I will get some ordered

Cheers,Lee.

[Jarlath]

They are technically Molex Picoblade, 1.25mm pitch.

However at that size the JST-GH (also 1.25mm pitch) works in the same receptacle.

[Model Builder 4]

Thanks for confirming Jarlath I've placed an order for some so just got to wait for them to arrive

Cheers,Lee.