KV-13(OBJEKT 233 )
-
c.rainford73
- Major
- Posts: 6104
- Joined: Thu Aug 25, 2016 7:34 pm
- Location: Connecticut USA
-
Artem RedArmy
- Private
- Posts: 95
- Joined: Mon Oct 25, 2021 6:08 am
Re: KV-13(OBJEKT 233 )
https://youtu.be/XggxbzoRNk8
I changed the recoil and lifting to the installation without servo
I changed the recoil and lifting to the installation without servo
-
Herr Dr. Professor
- Major
- Posts: 5567
- Joined: Mon Apr 22, 2019 10:48 pm
- Location: Southern Wisconsin USA
Re: KV-13(OBJEKT 233 )
Your change makes for a compact operating recoil barrel, fitting in the turret well. And the recoil is convincingly fast, looking realistic.
-
Artem RedArmy
- Private
- Posts: 95
- Joined: Mon Oct 25, 2021 6:08 am
Re: KV-13(OBJEKT 233 )
The main idea is not to use servo. this allows the henglong 6.0/7.0 boards to work
-
HERMAN BIX
- Major-General
- Posts: 11490
- Joined: Sun Jan 12, 2014 12:15 am
- Location: Gold Coast,Australia
Re: KV-13(OBJEKT 233 )
Brilliant Sir
HL JAGDPANTHER,HL TIGER 1,HL PzIII MUNITIONSCHLEPPER, HL KT OCTOPUS,HL PANTHER ZU-FUSS,HL STuG III,HL T34/85 BEDSPRING,
HL PZIV MALTA,MATORRO JAGDTIGER,HL F05 TIGER,TAMIYA KT,HL PANTHERDOZER,HL EARLY PANTHER G,TAIGEN/RAMINATOR T34/76,
HL AN-BRI-RAM SU-85
HL PZIV MALTA,MATORRO JAGDTIGER,HL F05 TIGER,TAMIYA KT,HL PANTHERDOZER,HL EARLY PANTHER G,TAIGEN/RAMINATOR T34/76,
HL AN-BRI-RAM SU-85
Re: KV-13(OBJEKT 233 )
Artem RedArmy wrote: ↑Fri Jun 23, 2023 1:19 pm https://youtu.be/XggxbzoRNk8
I changed the recoil and lifting to the installation without servo
I am impressed by your work with the recoil. Can you explain how you did it? I am a beginner with electronics but I like the way your barrel recoils. I had considered upgrading to 7.1 for the servo recoil function but I am looking for a cheaper alternative using what I have on hand already.Artem RedArmy wrote: ↑Mon Jun 26, 2023 7:03 am The main idea is not to use servo. this allows the henglong 6.0/7.0 boards to work
Thank you in advance great work.
Chef
"Charlie don't surf"- Lt. Col. Bill Kilgore
-
Artem RedArmy
- Private
- Posts: 95
- Joined: Mon Oct 25, 2021 6:08 am
-
MonsieurTox
- Sergeant
- Posts: 665
- Joined: Thu Nov 04, 2021 4:30 pm
- Location: Paris
Re: KV-13(OBJEKT 233 )
Looking awesome mate !
Is that a solenoid for the recoil ?
What about the lifting unit ? You said no servo but it does look like a servo, however speed is very low (and it looks great), I used a modified servo to be used with a TK 7.0 on my Churchill for the lifting but it's super fast, way too fast to be realist, I have to be super easy on the stick to look accurate.
Is that a solenoid for the recoil ?
What about the lifting unit ? You said no servo but it does look like a servo, however speed is very low (and it looks great), I used a modified servo to be used with a TK 7.0 on my Churchill for the lifting but it's super fast, way too fast to be realist, I have to be super easy on the stick to look accurate.
My parts for 3D printing :
https://cults3d.com/@CaptainTox
https://cults3d.com/@CaptainTox
-
Artem RedArmy
- Private
- Posts: 95
- Joined: Mon Oct 25, 2021 6:08 am
Re: KV-13(OBJEKT 233 )
I used this gearbox. Смотри, что есть на AliExpress! N20 металлическая коробка передач, редукторный двигатель DC3V 6В 12В 4rpm-380rpm медленная скорость Электродвигатель с высоким крутящим моментом DIY робот автомобиль элтрический замок за 347,10 ₽ - уже со скидкой -7%
https://sl.aliexpress.ru/p?key=BsSPZED
https://sl.aliexpress.ru/p?key=BsSPZED
