3D Printed Comet from 3dprintedtanks
Re: 3D Printed Comet from 3dprintedtanks
looks fantastic. The TPU looks awesome too by the way, your printer is setup perfectly
Regards,
Jaap
Jaap
- HERMAN BIX
- Brigadier
- Posts: 10411
- Joined: Sun Jan 12, 2014 12:15 am
- Location: Gold Coast,Australia
Re: 3D Printed Comet from 3dprintedtanks
Suiperb work. I wish I was smart enough to get one of those printer gadgets working
HL JAGDPANTHER,HL TIGER 1,HL PzIII MUNITIONSCHLEPPER, HL KT OCTOPUS,HL PANTHER ZU-FUSS,HL STuG III,HL T34/85 BEDSPRING,
HL PZIV MALTA,MATORRO JAGDTIGER,HL F05 TIGER,TAMIYA KT,HL PANTHERDOZER,HL EARLY PANTHER G,TAIGEN/RAMINATOR T34/76,
HL AN-BRI-RAM SU-85
HL PZIV MALTA,MATORRO JAGDTIGER,HL F05 TIGER,TAMIYA KT,HL PANTHERDOZER,HL EARLY PANTHER G,TAIGEN/RAMINATOR T34/76,
HL AN-BRI-RAM SU-85
Re: 3D Printed Comet from 3dprintedtanks
HERMAN
Thank you for your kind words.
I see you have a number of Heng Long tanks! I was looking at the HL 7.1 main board and was wondering if you know if it would be suitable for controlling the Comet. It has 2 540 size motors in it and I would like to use a smoke generator and maybe engine noise. Also it will have a rotating turret and elevating barrel.
Steve..
Thank you for your kind words.
I see you have a number of Heng Long tanks! I was looking at the HL 7.1 main board and was wondering if you know if it would be suitable for controlling the Comet. It has 2 540 size motors in it and I would like to use a smoke generator and maybe engine noise. Also it will have a rotating turret and elevating barrel.
Steve..
- HERMAN BIX
- Brigadier
- Posts: 10411
- Joined: Sun Jan 12, 2014 12:15 am
- Location: Gold Coast,Australia
Re: 3D Printed Comet from 3dprintedtanks
As the 7.1 I'm not qualified to say as I have only just got a V7.0.
However, from what I do know about them is that the sound options are very limited.
The heng long 6.0, 6.1s, have 4 sounds but none are close to a Meteor engine for the Comet.
Tiger 1, Leo 2, T90 and Abrams in the one board.
The 7.0 and 7.1 from what I have been advised are only 2 sound options, tiger 1 and leo 2, T90 and Abrams on separate boards.
6.1s and 7.1 are servo compatible, which might be handy.
I'd say to get just precisely what you want to hear from such a massive achievement is a custom Clark set up from Mr Maxmekker who is an upstanding member here.
However, from what I do know about them is that the sound options are very limited.
The heng long 6.0, 6.1s, have 4 sounds but none are close to a Meteor engine for the Comet.
Tiger 1, Leo 2, T90 and Abrams in the one board.
The 7.0 and 7.1 from what I have been advised are only 2 sound options, tiger 1 and leo 2, T90 and Abrams on separate boards.
6.1s and 7.1 are servo compatible, which might be handy.
I'd say to get just precisely what you want to hear from such a massive achievement is a custom Clark set up from Mr Maxmekker who is an upstanding member here.
HL JAGDPANTHER,HL TIGER 1,HL PzIII MUNITIONSCHLEPPER, HL KT OCTOPUS,HL PANTHER ZU-FUSS,HL STuG III,HL T34/85 BEDSPRING,
HL PZIV MALTA,MATORRO JAGDTIGER,HL F05 TIGER,TAMIYA KT,HL PANTHERDOZER,HL EARLY PANTHER G,TAIGEN/RAMINATOR T34/76,
HL AN-BRI-RAM SU-85
HL PZIV MALTA,MATORRO JAGDTIGER,HL F05 TIGER,TAMIYA KT,HL PANTHERDOZER,HL EARLY PANTHER G,TAIGEN/RAMINATOR T34/76,
HL AN-BRI-RAM SU-85
-
- Lance Corporal
- Posts: 137
- Joined: Sat Oct 03, 2020 4:34 am
Re: 3D Printed Comet from 3dprintedtanks
Styx that is awesome man , well done .
- tankme
- Warrant Officer 1st Class
- Posts: 2016
- Joined: Tue Oct 31, 2017 3:51 pm
- Location: Elgin, TX
- Contact:
Re: 3D Printed Comet from 3dprintedtanks
On larger tanks I personally would just use a Benedini sound card and ESCs to control the motors since there aren't any IR battle functions needed. Servos can be plugged directly into the receiver. RC switches can be used to do the lights.
Derek
Too many project builds to list...
Too many project builds to list...
Re: 3D Printed Comet from 3dprintedtanks
After a 3 week break it's back onto the Comet. Turret build going well.
https://www.youtube.com/watch?v=CNm2hGZ ... =SteveStyx
https://www.youtube.com/watch?v=CNm2hGZ ... =SteveStyx
- Attachments
-
- 028.jpg (79.17 KiB) Viewed 5114 times
Re: 3D Printed Comet from 3dprintedtanks
Looks superb, makes me want to build one as well
In progress:
M4A1(75)
M4A1(76)W HVSS
M4A2 Fisher
M4A1(75)
M4A1(76)W HVSS
M4A2 Fisher
- tankme
- Warrant Officer 1st Class
- Posts: 2016
- Joined: Tue Oct 31, 2017 3:51 pm
- Location: Elgin, TX
- Contact:
Re: 3D Printed Comet from 3dprintedtanks
Definitely looks very detailed.
Derek
Too many project builds to list...
Too many project builds to list...
Re: 3D Printed Comet from 3dprintedtanks
Go for it Risky, it goes together amazingly well.