Tamiya leopard2a6 no recoil action

[DTKK]

Hi, need help. My Tamiya leopard 2a6 body no recoil action when gun fire (the gun recoil is normal. What's the problem?

[Jofaur86]

viewforum.php?f=42
Hello, I think you forgot to go through this post, it's easier to get help, to introduce yourself, to know a little more about you, your passions, how long have you been modeling? ect, etc. Thank you in advance

[DTKK]

Jofaur86 thanks for your remind. I have did it in "introduce yourself" already.

[r32]

The "body recoil" is dependent on your tank class setting, light medium or heavy. You get the most body movement in the light setting.

[DTKK]

R32, No reaction for those setting.

[Jofaur86]

Hello, is this problem recent? already worked? comme il faut ... What type of transmitter do you use? Is the travel of the servo outputs correctly adjusted? if programmable radio, not a setting that would have moved? mechanically no worries? it's only loose ideas, like that.for info, attached notice
https://www.manualslib.com/manual/19920 ... =14#manual

[Jofaur86]

https://www.manualslib.com/manual/19920 ... =17#manual has this been respected? at Tamiya, some adjustments are made by shifting certain Trims, so in the case of a programmable radio, pay attention to the percentage of adjustment of the Trims, in the menu.

[Irvlabs]

Hello, I am having the same problem with the same tank. I have traced to the gear box. The drive motor does turn a lil when the canon shoots. But when assembled within the gearbox, the motor doesn’t turn as much. I can’t figure it out. I retraced the instructions. All I can see is on page 14 section 7, there is a spurgear A and spurgear B. Both my spurgears are A. Any help on this would be greatly appreciated. I have halted the tank build until I remedy this.

[Irvlabs]

I actually re build the gearbox and I have everything corrected. I just can’t get the gearbox not to bind when closing it.

[Jofaur86]

Hello, so it would be a mechanical problem? everything seems to line up well, sprockets, axles, etc. bearings poorly centered? axes that force? is it metal or plastic?