VK 16.02 Leopard
Re: VK 16.02 Leopard
Hi friends,
Test run at home . I used my Flysky fs-i6 and a cheap dual way ESC as electronics:
Test run at home . I used my Flysky fs-i6 and a cheap dual way ESC as electronics:
Re: VK 16.02 Leopard
Hi friends,
The project is not stopped, it is on vacation for now
The project has reached the desired level of maturity and, as I mentioned before, it is time to share it:
https://github.com/edumardo/VK-16.02-Leopard
On this page you can download all available STL files: hull, upper, suspension and rear stuff. Go to Releases on the right side, and click on Source code (zip). Please read carefully the README file, this project is WIP and require additional non-printable parts.
Also take a look to the assembly documents, an example:
The project is not stopped, it is on vacation for now
The project has reached the desired level of maturity and, as I mentioned before, it is time to share it:
https://github.com/edumardo/VK-16.02-Leopard
On this page you can download all available STL files: hull, upper, suspension and rear stuff. Go to Releases on the right side, and click on Source code (zip). Please read carefully the README file, this project is WIP and require additional non-printable parts.
Also take a look to the assembly documents, an example:
Re: VK 16.02 Leopard
I also published the model on Printables:
https://www.printables.com/es/model/245 ... 02-leopard
This site is more user friendly.
https://www.printables.com/es/model/245 ... 02-leopard
This site is more user friendly.
- Panzer Fenris
- Recruit
- Posts: 24
- Joined: Sun Mar 24, 2013 8:14 pm
- Location: Norway
Re: VK 16.02 Leopard
Beautiful model, and using the print bed to texture the armour plates is a stroke of genius!
Also, thanks a lot for making the files public. Very generous, and maybe I'll give this particular model a crack one day.
I remember having a lot of fun with this little critter back when I played World of Tanks.
Also, thanks a lot for making the files public. Very generous, and maybe I'll give this particular model a crack one day.
I remember having a lot of fun with this little critter back when I played World of Tanks.
Current vehicles:
- Panzerkampfwagen VI Tiger Ausf. B (1/16 Torro Pro)
- Panzerkampfwagen VI Tiger Ausf. E (1/16 HL 7.0)
- Panzerkampfwagen VI Tiger Ausf. E (1/16 HL Vintage parts donor)
- WPL B14
Past vehicles:
- NM217 Bergepanser (1/1 KMW)
- Panzerkampfwagen VI Tiger Ausf. B (1/16 Torro Pro)
- Panzerkampfwagen VI Tiger Ausf. E (1/16 HL 7.0)
- Panzerkampfwagen VI Tiger Ausf. E (1/16 HL Vintage parts donor)
- WPL B14
Past vehicles:
- NM217 Bergepanser (1/1 KMW)
- c.rainford73
- Major
- Posts: 6104
- Joined: Thu Aug 25, 2016 7:34 pm
- Location: Connecticut USA
Re: VK 16.02 Leopard
Yes, small and heavy, perfect for scouting and rammingPanzer Fenris wrote:I remember having a lot of fun with this little critter back when I played World of Tanks.
After some troubles with thingiverse website, the model is also available there: https://www.thingiverse.com/thing:5446778
Remember friends that the most updated files will always be on github, check the version before starting printing.
Re: VK 16.02 Leopard
Hi gyus,
I've been busy with other projects, but good news! I'm about to publish the turret files, including turning, elevation and recoil
I have spent hours and hours and hours redesigning and printing until I came up with a valid design. The recoil system is fully inspired in the RiskyR M4A1 Sherman.
A few photos of the model and construction:
The entire turret and mantlet looks very smooth
I've been busy with other projects, but good news! I'm about to publish the turret files, including turning, elevation and recoil
I have spent hours and hours and hours redesigning and printing until I came up with a valid design. The recoil system is fully inspired in the RiskyR M4A1 Sherman.
A few photos of the model and construction:
The entire turret and mantlet looks very smooth
Re: VK 16.02 Leopard
The first thing I was thinking when I saw your pictures: "hey, that looks familiar!"
Looks very nice, I'm glad I was able to inspire someone to do this themselves! Keep up the good work
Looks very nice, I'm glad I was able to inspire someone to do this themselves! Keep up the good work
In progress:
M4A1(75)
M4A1(76)W HVSS
M4A2 Fisher
M4A1(75)
M4A1(76)W HVSS
M4A2 Fisher
Re: VK 16.02 Leopard
Hi guys,
I have released the turret files on printables: https://www.printables.com/es/model/245 ... 02-leopard
I also updated the assembly guide: Enjoy printing
I have released the turret files on printables: https://www.printables.com/es/model/245 ... 02-leopard
I also updated the assembly guide: Enjoy printing