Another 1:16 T-35 3D-Print Build
Re: Another 1:16 T-35 3D-Print Build
Gotta have lights:
Renault FT, British WW1 Mk. 4), Pz 1A DAK, 1B, II L, III, StuG III, PzKpfw IV, StuG IV, King Tiger, T-34/76, KV-1E, T-35A 3DP, Zik-2, T-90, M3 Lee, M4 Sherman, M26 Pershing, M41 Bulldog, M1 Abrams. In the works: Ram II, Pz 1 Breda. 
Re: Another 1:16 T-35 3D-Print Build
Here's where I'm starting to have fun. I replaced the original machine gun barrel in the tertiary turret with a brass tube containing a lucite rod. I placed a red LED behind it in the turret and plugged into the machine gun circuit on the board.
Next, my partner in this gave me a "Random Servo Motion Generator", made by RC Geek. It runs off the power leads of a servo circuit, such as the and elevation. It generates random motion, modifiable in frequency, speed and travel via potentiometers on the board. There are two outputs, each able to run a servo independently of the other. I put a micro servo in each turret, with the servo arms anchored on the hull. Just the mg turret is plugged in on this clip.
Next, my partner in this gave me a "Random Servo Motion Generator", made by RC Geek. It runs off the power leads of a servo circuit, such as the and elevation. It generates random motion, modifiable in frequency, speed and travel via potentiometers on the board. There are two outputs, each able to run a servo independently of the other. I put a micro servo in each turret, with the servo arms anchored on the hull. Just the mg turret is plugged in on this clip.
Renault FT, British WW1 Mk. 4), Pz 1A DAK, 1B, II L, III, StuG III, PzKpfw IV, StuG IV, King Tiger, T-34/76, KV-1E, T-35A 3DP, Zik-2, T-90, M3 Lee, M4 Sherman, M26 Pershing, M41 Bulldog, M1 Abrams. In the works: Ram II, Pz 1 Breda.
Re: Another 1:16 T-35 3D-Print Build
WW2 tanks belch smoke, especially when starting up. The T-35 has one exhaust pipe, protruding from the rear deck. I took a Heng Long smoker, plugged one of the two tubes, fashioned a brass vent and added it to the build. Smokes pretty good because there's just one tube and the orientation allows the fluid to flow down into the unit easily, which is always a problem with them.
Renault FT, British WW1 Mk. 4), Pz 1A DAK, 1B, II L, III, StuG III, PzKpfw IV, StuG IV, King Tiger, T-34/76, KV-1E, T-35A 3DP, Zik-2, T-90, M3 Lee, M4 Sherman, M26 Pershing, M41 Bulldog, M1 Abrams. In the works: Ram II, Pz 1 Breda.
Re: Another 1:16 T-35 3D-Print Build
I need a printer.... Did the lunatic printing the 1/6th scale one ever finish it? And if so, did he get it out of the room?
-
stu_the_flat
- Lance Corporal
- Posts: 186
- Joined: Sun Oct 17, 2021 8:19 am
- Location: Glasgow
Re: Another 1:16 T-35 3D-Print Build
Wow your a fast builder! 
Looks amazing!
Looks amazing!Re: Another 1:16 T-35 3D-Print Build
No, but it will make for a nice canoe when his basement next floods...RobW wrote:I need a printer.... Did the lunatic printing the 1/6th scale one ever finish it? And if so, did he get it out of the room?
Re: Another 1:16 T-35 3D-Print Build
The chassis took a few months, mostly because we were involved in other stuff. We really got up to speed in the last month.stu_the_flat wrote:Wow your a fast builder!
Renault FT, British WW1 Mk. 4), Pz 1A DAK, 1B, II L, III, StuG III, PzKpfw IV, StuG IV, King Tiger, T-34/76, KV-1E, T-35A 3DP, Zik-2, T-90, M3 Lee, M4 Sherman, M26 Pershing, M41 Bulldog, M1 Abrams. In the works: Ram II, Pz 1 Breda.
Re: Another 1:16 T-35 3D-Print Build
Five second clip showing where the exhaust vents. Looks like that Soviet engine has really high compression! 
Renault FT, British WW1 Mk. 4), Pz 1A DAK, 1B, II L, III, StuG III, PzKpfw IV, StuG IV, King Tiger, T-34/76, KV-1E, T-35A 3DP, Zik-2, T-90, M3 Lee, M4 Sherman, M26 Pershing, M41 Bulldog, M1 Abrams. In the works: Ram II, Pz 1 Breda.
-
Kaczor
- Warrant Officer 1st Class
- Posts: 2208
- Joined: Fri May 18, 2018 9:58 am
- Location: Ciechanow, Poland
- Contact:
Re: Another 1:16 T-35 3D-Print Build
Great build! My dad's T-35 is still in parts from many months.
-
Will01Capri
- 2nd Lieutenant
- Posts: 2708
- Joined: Tue Jul 18, 2017 5:34 pm
- Location: South Scotland
Re: Another 1:16 T-35 3D-Print Build
Tiger6 wrote:No, but it will make for a nice canoe when his basement next floods...RobW wrote:I need a printer.... Did the lunatic printing the 1/6th scale one ever finish it? And if so, did he get it out of the room?
i am going to tell him lol
HL camo E' Tiger
HL L' Tiger
M26 Pershing WW2 project
Tam K'Tiger project
HL Walker Bulldog project?
HL Panzer IV Munitionsschlepper für Karl-Gerät
HL Sherman project?
1/24 Leopard 2 Custom mod
2 many trucks to list!
HL L' Tiger
M26 Pershing WW2 project
Tam K'Tiger project
HL Walker Bulldog project?
HL Panzer IV Munitionsschlepper für Karl-Gerät
HL Sherman project?
1/24 Leopard 2 Custom mod
2 many trucks to list!
