Guys.
Thank you for all the advice, although some of the technical stuff has gone over my head so I need to do more reading about Tanks in general and Tigers in particular...
I have discovered that there weren’t any Heer units with Tigers in Normandie so it will have to be an SS unit...
Trying to determine which I could use...
Not thinking of doing any specific Tank, I couldn’t do the historical accuracy justice... but to create a generically correct representation of a Tiger in that era and that location.
So progress to day... removed the smoke mortars.. the front shovel and the spare track rack. I’ve removed the air filters off the rear panel...
I ve stripped the suspension and tracks..
I’ve removed all the accessories...
I’ve dry fitted the Zimmerit...
Had to move the turret escape hatch...
Had to alter the left turret zimmerit sheet to adjust for the difference in location of the spigot thingy and I cut a hole to allow the pistol port to be fitted back on the turret...
I’ve ordered tack and clips to go on the side of the turret...
I need to work out what the rear deck should look like as there’s bits of the air filter pipes etc still to be

Not sure yet...
I’m going to leave the Twin headlamps A’s is, and the loaders hatch hinges, and the binocular sight as I don’t know what it looks like...
I’ve ordered up a new metal escape hatch, the HL one didn’t survive the surgery to remove, Leo metal mud flaps and hinges... keep losing the plastic ones...
I’ve fitted all but one of the Zimmerit sheets... due to the hatch on order...
And I’ve resprayed the lower hull in dunkelgelb...
made a wheel stencil and did the wheels in dunkelgelb...
ran out of dunkelgelb....