After some tech help and couldn't find a sub forum .
Can I bind an Aux channel to throttle channel to make a tank turn I have read this https://www.google.com/search?q=DIFFERE ... O82rjQCg15 and I can do it but would I have reverse with a heli radio. This is what I'm trying to emulate https://www.3dprintedtanks.com/zapojeni/ or should I just buy an open source radio/receiver or a car car type radio/receiver ?
any help appreciated.
DX6I/AR7200BX Heli radio/receiver
-
- Lance Corporal
- Posts: 137
- Joined: Sat Oct 03, 2020 4:34 am
- Rad_Schuhart
- Warrant Officer 1st Class
- Posts: 2001
- Joined: Tue Jan 19, 2016 9:22 am
- Location: Spanish living in Graz, Austria. Heart in UK.
- Contact:
Re: DX6I/AR7200BX Heli radio/receiver
An open source radio is the way to go. With it you will start really enjoying the hobby.
My RC tanks website, loads of free info for everybody:
https://radindustries.wordpress.com/
https://radindustries.wordpress.com/
-
- Lance Corporal
- Posts: 137
- Joined: Sat Oct 03, 2020 4:34 am
Re: DX6I/AR7200BX Heli radio/receiver
Thanks RAD , I believe I will be able to use 2 channels on the DX6i/AR7200BX to get all the movements I want but need help to figure it out is all.
If I could afford an Open TX system I'd be all over it. I am using a radio from a Helo I don't fly anymore to keep the costs down. I am a pensioner and costs are the issue.
Thank you your site is amazing. .
If I could afford an Open TX system I'd be all over it. I am using a radio from a Helo I don't fly anymore to keep the costs down. I am a pensioner and costs are the issue.
Thank you your site is amazing. .
Last edited by Biasphere1 on Wed May 19, 2021 4:20 am, edited 1 time in total.
-
- Lance Corporal
- Posts: 137
- Joined: Sat Oct 03, 2020 4:34 am
Re: DX6I/AR7200BX Heli radio/receiver
My plan is this or similar to use the Ar7200BX through throttle and elevator then ESC's to drive the tank.
Any help appreciated.
Any help appreciated.
- Attachments
-
- using throttle and elevator to drive the tank through the ESC's.
- ar7200bx_2.jpg (20.99 KiB) Viewed 937 times
-
- but use the AR7200BX receiver
- tank-elektronika.jpg (88.25 KiB) Viewed 937 times
-
- Lance Corporal
- Posts: 137
- Joined: Sat Oct 03, 2020 4:34 am
Re: DX6I/AR7200BX Heli radio/receiver
Would this work between the RX and the ESC's ?
- Attachments
-
- tr-v-tail.jpg (51.16 KiB) Viewed 931 times