TK6.1s IR hit response

Discuss the good old Heng Long electronics here, whether its mods on them or anything else, it goes here!
Post Reply
Cyberbreath
Recruit
Posts: 3
Joined: Thu Dec 31, 2020 12:51 pm

TK6.1s IR hit response

Post by Cyberbreath »

Hi Tankers, I have recently fitted a TK6.1s mfu into my TAIGEN/HL hybrid Leopard and found that with only 1 hit it shuts down, as opposed to the normal 5/6 hits before shutdown on my TK6.0s mfu’s. Has anyone else experience of this?
Thanks. :D
Top
User avatar
Son of a gun-ner
Lieutenant-Colonel
Posts: 7504
Joined: Sun May 07, 2017 8:49 pm
Location: Lancashire UK

Re: TK6.1s IR hit response

Post by Son of a gun-ner »

I can't say I have, but I have experienced many new forum members making an introductory post in the introduce yourself section to join in with the friendly banter ;) :thumbup:
Mick - The grit in the underpants of life!
Always happy to spare the bytes
Apparently my mind works in mysterious ways :think:

TOTM needs YOU :thumbup: support YOUR TOTM competition, I'm doing my part, are YOU?
Top
User avatar
abramsky
Lance Corporal
Posts: 241
Joined: Thu Dec 03, 2020 12:55 am
Location: Poland

Re: TK6.1s IR hit response

Post by abramsky »

Cyberbreath wrote:Hi Tankers, I have recently fitted a TK6.1s mfu into my TAIGEN/HL hybrid Leopard and found that with only 1 hit it shuts down, as opposed to the normal 5/6 hits before shutdown on my TK6.0s mfu’s. Has anyone else experience of this?
Thanks. :D
Hello!
It's weird. If the wires are not damaged / swapped - it should work normally. There are only 5 wires, and 3 of which are an IR receiver. First check on the receiver that the S- signal and + (plus) wires are not reversed. And one more thing. Is the IR receiver module from HL (or compatible with HL)?
Top
Post Reply

Return to “Heng Long”