RCCommand Battle System Version 2.0 Installation Progress

[fv432]

will e-mail bill and ask him

[bowlman]

RC Command shows only there Battle System now no DBC or DBCRC2 at all .

Jimmy

[Ex_Pat_Tanker]

Well, The Blitz was assembling the DBC units for Bill so I'm not suprised his supply has dried up...

[971wright]

Hi Nick I would give it one more go with a cooled board ,If you need a fan I have one that will fit I have fitted them to my Rx 18 boards ,I know your going on Hoilday this week so have a nice time and chill out ,then we will get to the bottom of this .

  regards pete

[Saxondog]

Is their any new information on the system problem's?

[Gigantohawk]

Hi Gents,
Just back from our break in Hampshire.
No news yet on any problem fixes. Bill RCCommand has sent me 2 new I.c. chips for the battle boards. I've emailed him to advise me on what to do next. I have 1 remaining V 2.0 system that is untried and 1 unmelted Stug III.
At the moment Gentlemen it seems to be a War of Attrition and I'm quickly running out of serviceable armour. So I hope I get some help soon.

Best regards,

Nick.

[wibblywobbly]

Not that I am mercenary or anything, but about that Stug....

[Gigantohawk]

Been having chat's with Rob fv432 about possible mis-wiring and other problems that might throw some light on the complete lack of success I'm having with these systems.

Here's a pic that Bubbajoe sent to help with the wiring,

And another one showing Pin orientation. I hope that helps Rob.

p.s. I took the rx-18 case apart and it all looks very burnt in there.

[971wright]

Hi Nick Do you want a fan to cool the rx18 board if you do can have it in the post tommorrow they are easy to fit and should stop the board burning up .

regards pete

[Gigantohawk]

Thanks Pete. That makes a lot of sense. Where would I wire it in...directly to the RX18 board ?