Please Help With My Leo 2A6 Replies Needed PLEASE HELP

[43rdRecceReg]

What surface were you running it on? It might not like carpet, or grass, especially if the battery isn't fully charged.

[General Jumbo01]

SO, WHY DONT YOU TRY CHARGING THE AGAIN. TRY DOING IT now

Sent from my ASUS_T00G using Tapatalk

[mhmm041998]

What surface were you running it on? It might not like carpet, or grass, especially if the battery isn't fully charged.

Im Running It On Smooth Tiles

Sent from my ATU-L22 using Tapatalk

[mhmm041998]

SO, WHY DONT YOU TRY CHARGING THE AGAIN. TRY DOING IT now

Sent from my ASUS_T00G using Tapatalk

I Just Fully Charged It Before I Tried To Run It Again

Sent from my ATU-L22 using Tapatalk

[43rdRecceReg]

Try adjusting the trimmers on the Transmitter, especially if the Tank performs well in a straight line, but goes rogue on turns.

[mhmm041998]

Try adjusting the trimmers on the Transmitter, especially if the Tank performs well in a straight line, but goes rogue on turns.

It Rarely Goes On Standby Mode When Driving It In Straight Line On Full Throttle, All Trims Are All In The Middle

Sent from my ATU-L22 using Tapatalk

[jarndice]

As Tom Hugill says if you introduce yourself first we are more likely to be receptive to your questions and as Chris said try using another Battery,
A NiMh or a NiCad would be fine.

[mhmm041998]

As Tom Hugill says if you introduce yourself first we are more likely to be receptive to your questions and as Chris said try using another Battery,
A NiMh or a NiCad would be fine.

Okay I'll Introduce Myself Would It Be Fine If I Will Use A 7.2V 5000MaH NiCd Battery, To Change my 7.4V 1800MaH Li-On Stock Battery, Wont It Be Underpowered?

Sent from my ATU-L22 using Tapatalk

[midlife306]

It’ll be Fine


Sent from my iPhone using Tapatalk

[mhmm041998]

As Tom Hugill says if you introduce yourself first we are more likely to be receptive to your questions and as Chris said try using another Battery,
A NiMh or a NiCad would be fine.

Okay I'll Introduce Myself Would It Be Fine If I Will Use A 7.2V 5000MaH NiCd Battery, To Change my 7.4V 1800MaH Li-On Stock Battery, Wont It Be Underpowered?

Sent from my ATU-L22 using Tapatalk

I Mean A 7.2v 5000MaH NiMH Battery Would It Be Fine? Because My Stock Battery Is A 7.4v Li-On 1800MaH Battery