Kv1 mantlet question.

[Scarecrow]

Evening gents.

I picked up an early issue heng long kv1 last month and whilst I'm waiting for the ztz bits I melted to be replaced I've started pulling it apart.

Pulled the red led out of the mantlet and I can see annoyingly that needs filling and a new hole drilling to the left of the top bolt.

My question is this, is that the gunners site or turret mg?

Any ideas?

[blimp]

the LED is where the gunners sight was , the coaxial MG is a small hole on the other side-
https://upload.wikimedia.org/wikipedia/ ... rola_1.jpg

[Scarecrow]

Thats perfect thanks!