AMX 50 120 surbaissé

[MITCH]

Hi everybody!


here is my 3D printed AMX 50 120 surbaissé, it is in progress, I move slowly, but I will tell you about the evolution…













And the first part of the gearbox:



If you like it, you can see the progression of then start here: http://www.forum-rc-panzer.com/t7331-AM ... rbaiss.htm

[midlife306]

Beautiful work
Thanks for sharing it with us
Cheers
Wayne


Sent from my iPhone using Tapatalk

[orntar]

It's very impressive! What hull are you using, or did you print that too?

And what is gong on with that gear box? Looks cool!

[square4]

Very nice indeed, look forward to updates on progress.

[MITCH]

Thank you!

It's very impressive! What hull are you using, or did you print that too?

And what is gong on with that gear box? Looks cool!

Every part is printed except the swing arms and torsion bars (Tamyia)







The gear box is based on the same concept that the PDSGB or the Tamyia gear box for Leo 2. But I hope it will be silent...

[43rdRecceReg]

Really impressive Have you already added surfacer in the first two pics, or did the printer produce that almost unblemished finish? It's a great printer if it did, and you're a great finisher if it didn't.

[Soeren]

Really impressive Have you already added surfacer in the first two pics, or did the printer produce that almost unblemished finish? It's a great printer if it did, and you're a great finisher if it didn't.

You really have to look up the French forum he linked to. So much more info and the online translator does a reasonable job for us non French speaking rc tank enthusiasts.

[MITCH]

My 3d printer is an Anet A8 upgraded. It is a low cost machine... but abs is an easy to sand material

[43rdRecceReg]

My 3d printer is an Anet A8 upgraded. It is a low cost machine... but abs is an easy to sand material

Indeed, and I think I'm right in saying ABS a far better plastic than PLA.. and probably easier to bond.
Nonetheless, your finishing is still exemplary

[orntar]

My 3d printer is an Anet A8 upgraded. It is a low cost machine... but abs is an easy to sand material

I have the same printer! Great project you have there.