
Ni-Mh/Ni-Cd Versus Li-Po.
Forum rules
If your question is electronics related please post it in one of the relevant boards here: viewforum.php?f=31
If your question is electronics related please post it in one of the relevant boards here: viewforum.php?f=31
- wibblywobbly
- Major
- Posts: 6396
- Joined: Fri Oct 17, 2008 9:30 am
- Location: South Wales Valley
- Contact:
Re: Ni-Mh/Ni-Cd Versus Li-Po.
After testing the Nimh batteries on a multimeter they were not discharged? Checked the switch, the soldering was ok, but eventually found that the switch has an intermittent contact internally. Need to buy some new switches and test it again.


Tiger 1 Late
Panther G
King Tiger
M36 B1
Panther G
King Tiger
M36 B1
-
- Warrant Officer 1st Class
- Posts: 2172
- Joined: Tue Dec 25, 2018 11:28 pm
- Location: Centre France
Re: Ni-Mh/Ni-Cd Versus Li-Po.
Hello
Attention,the measurement with the voltmeter is not a sufficient indication ??in fact there may be a voltage ( volts ) but no capacity ( Mah ) enough current to opérate a Led or other,but if demand a strong consumption,the battery goes to it knees,it is necessary to measure in charge
Hence the usefulness of a good charger,those delivered originally with ou thank,are only beasts feeding,without any system of limit of current and tension

Attention,the measurement with the voltmeter is not a sufficient indication ??in fact there may be a voltage ( volts ) but no capacity ( Mah ) enough current to opérate a Led or other,but if demand a strong consumption,the battery goes to it knees,it is necessary to measure in charge

Hence the usefulness of a good charger,those delivered originally with ou thank,are only beasts feeding,without any system of limit of current and tension
