Advice on MFU replacement for Heng Long T-34

[wyvern]

Hi,

On a visit to my local hobby shop, I succumbed to a bit of an impulse purchase sold as non working so quite cheap. Thought it might be a loose wire or something similar. When I took it home an opened it up, I noticed the MFU was missing which might explain it not working. some photos below - I have worked out its a V5.2 hl 2.4 ghz transmitter and the label on the tank states that it was made in Nov 2014. One option is to get a new MFU which I believe is all that's required. Just need some confirmation that the item on the link below is suitable (believe its at V5.2 mfu);

https://www.ebay.co.uk/itm/Heng-Long-1- ... :rk:1:pf:0

Are there any differences between the 5.1, 5.2 and 5.3 version MFUs or is it all in the transmitter?





Thanks

Guy

[43rdRecceReg]

If you scroll to the bottom of this page on Heng Long Panzer; you'll get an idea of the differences:
https://heng-long-panzer.de/en/Heng-Lon ... ectronics/
'Version' numbers seem to vary according to which vendor's website you're looking at.
Here's Haya's take on MFUs and transmitters:
https://www.hayaltd.co.uk/index.aspx?pa ... 131&Page=2
I guess the 2014 MFU version would be the 3rd generation 2.4G one. The latest ( 2 Sound) version would require some wiring mods, a new MFU and Transmitter to get the full benefit of the improvements.
Then there's the binding issue....
There's quite a lot of stuff on HL MFU variations in the Archives here.