Easyest way of adding smoke to wsn T-34?

Feel free to discuss anything and everything to do with tanking here!
Post Reply
User avatar
vonrundstedt
Staff Sergeant
Posts: 994
Joined: Mon May 18, 2009 12:25 am
Location: Northampton, UK

Easyest way of adding smoke to wsn T-34?

Post by vonrundstedt »

Apart from actualy setting fire to the thing, what would be the easyest and cheapest way of adding a smoke unit to the T-34( still all original WSN gear)?
"He knows every thing about nothing, and not so much about that, if you know somebody who knows what he knows, then you must know....someone quite thick!
NigelDerEnglander
Lance Corporal
Posts: 136
Joined: Thu Nov 27, 2008 10:21 pm

Re: Easyest way of adding smoke to wsn T-34?

Post by NigelDerEnglander »

Hi, the simplest and easiest way is to simply wire up the smoke unit to the on/off switch! All it requires is ~6-8volts. This is assuming you are using a non-proportional smoker. The WSN electronics don't have multiple speeds, so a proportional smoker wouldn't make sense anyway.

If you want to go the whole hog and make it on- and off-able then add another switch in series so you can choose to use it or not - as you will soon get to hate the smell of the smoke!

Nige

PS Oh, the WSN uses 9.6v AA's but the extra load will probably pull the battery voltage down a bit. If it seems to be smoking a bit too much, add in one or two series diodes to drop the voltage by ~0.6v per diode. 1N4004 diodes will probably do it.
User avatar
vonrundstedt
Staff Sergeant
Posts: 994
Joined: Mon May 18, 2009 12:25 am
Location: Northampton, UK

Re: Easyest way of adding smoke to wsn T-34?

Post by vonrundstedt »

Brillient advice, thank You, Luke ;D ;D ;D
"He knows every thing about nothing, and not so much about that, if you know somebody who knows what he knows, then you must know....someone quite thick!
Post Reply

Return to “General Discussion”