ibu2u recoil problem

Discuss the IBU2 & IBU3 here.
Post Reply
Locb13
Recruit
Posts: 37
Joined: Mon Aug 28, 2017 11:59 am
Location: Moscow, Russia

ibu2u recoil problem

Post by Locb13 »

Hi guys!
I apologize for my google translator ...

The problem with the card ibu2u. The recoil server does not work. if you move the plug periodically begins to work. changed servos. did not help. changed the board. There is no effect. Solder the plug. also 0 imotions. It works very rarely if you move the servo hover. still happens when you turn on the board starts to jerk randomly. By all indications, there is no signal at the connector. what to do? The connected server to the board is easily rotated by hand, as if without power, but not always. what could be the trouble? HL and tamiya recoil works without problems ....
Help! 8O
Top
User avatar
MichaelC
2nd Lieutenant
Posts: 2449
Joined: Tue Oct 16, 2012 4:03 pm
Location: Toronto, Canada

Re: ibu2u recoil problem

Post by MichaelC »

Did you check the ini file to confirm the servo recoil settings ?
Top
Locb13
Recruit
Posts: 37
Joined: Mon Aug 28, 2017 11:59 am
Location: Moscow, Russia

Re: ibu2u recoil problem

Post by Locb13 »

Yes. I would say more they are the same as in another Board from a friend. he has a rollback is all I have. and rollback works if you find the position of the connector. contacts and degreased and cleaned... even overwritten on a new card and rewrote the Board to the latest firmware. no effect
Top
Post Reply

Return to “IBU2 / IBU3”