Katyusha
Katyusha
Saw the rockets on Shapeways and asked the seller Alex to put up the design for everything for 1/16 so here is what I have so far....... Super expensive but would be the only one running around hopefully. Still waiting for rails and rockets, will be scratch building the rest with pieces from the original truck and styrene sheets.
MichaelC.
MichaelC.
- c.rainford73
- Major
- Posts: 6104
- Joined: Thu Aug 25, 2016 7:34 pm
- Location: Connecticut USA
Re: Katyusha
Wow that's really impressive. Always wanted one of these. Mike how did you construct the ladder frame for the rockets?
Tanks alot....
Re: Katyusha
Carl, all Shapeways stuff other than the truck and also the rear bed. It was super expensive and I was going to DIY the rails, but just can't find large enough I beams and not good enough to make my own.
- c.rainford73
- Major
- Posts: 6104
- Joined: Thu Aug 25, 2016 7:34 pm
- Location: Connecticut USA
Re: Katyusha
Now to get a nice board to control it with the multiple rocket screaming sounds that are so iconic...
Tanks alot....
- Will01Capri
- 2nd Lieutenant
- Posts: 2704
- Joined: Tue Jul 18, 2017 5:34 pm
- Location: South Scotland
Re: Katyusha
That is perfect. Very nice work.
I was looking and thought it would be a but too much work for me with other projects, but I so glad someone else has pit the time and expense in.
Keep up the good work.
Are you keeping round arches or making new arches for front cab?
I was looking and thought it would be a but too much work for me with other projects, but I so glad someone else has pit the time and expense in.
Keep up the good work.
Are you keeping round arches or making new arches for front cab?
HL camo E' Tiger
HL L' Tiger
M26 Pershing WW2 project
Tam K'Tiger project
HL Walker Bulldog project?
HL Panzer IV Munitionsschlepper für Karl-Gerät
HL Sherman project?
1/24 Leopard 2 Custom mod
2 many trucks to list!
HL L' Tiger
M26 Pershing WW2 project
Tam K'Tiger project
HL Walker Bulldog project?
HL Panzer IV Munitionsschlepper für Karl-Gerät
HL Sherman project?
1/24 Leopard 2 Custom mod
2 many trucks to list!
- wibblywobbly
- Major
- Posts: 6395
- Joined: Fri Oct 17, 2008 9:30 am
- Location: South Wales Valley
- Contact:
Re: Katyusha
I did one a few years back before 3D printers were invented, I recall making the framework out of wooden kebab skewers and styrene rods, the rocket rails were cut out of long strips of styrene cut from a sheet glued to make girder style launch rails. I stuck flashing led's all over the rails to give that rocket launching effect.
Things would be so much easier nowadays.
There was a guy at the time who made one out of brass, and like he said, if there was a bolt head on the original, there was a bolt head on his model. Everything was fully functional. Doors, gear wheels etc etc, it was a work of art.
Things would be so much easier nowadays.
There was a guy at the time who made one out of brass, and like he said, if there was a bolt head on the original, there was a bolt head on his model. Everything was fully functional. Doors, gear wheels etc etc, it was a work of art.
Tiger 1 Late
Panther G
King Tiger
M36 B1
Panther G
King Tiger
M36 B1
- Will01Capri
- 2nd Lieutenant
- Posts: 2704
- Joined: Tue Jul 18, 2017 5:34 pm
- Location: South Scotland
Re: Katyusha
Nice, but now you are going to have to hunt out the Brass model pictures and your own. Be good to seewibblywobbly wrote:I did one a few years back before 3D printers were invented, I recall making the framework out of wooden kebab skewers and styrene rods, the rocket rails were cut out of long strips of styrene cut from a sheet glued to make girder style launch rails. I stuck flashing led's all over the rails to give that rocket launching effect.
Things would be so much easier nowadays.
There was a guy at the time who made one out of brass, and like he said, if there was a bolt head on the original, there was a bolt head on his model. Everything was fully functional. Doors, gear wheels etc etc, it was a work of art.
HL camo E' Tiger
HL L' Tiger
M26 Pershing WW2 project
Tam K'Tiger project
HL Walker Bulldog project?
HL Panzer IV Munitionsschlepper für Karl-Gerät
HL Sherman project?
1/24 Leopard 2 Custom mod
2 many trucks to list!
HL L' Tiger
M26 Pershing WW2 project
Tam K'Tiger project
HL Walker Bulldog project?
HL Panzer IV Munitionsschlepper für Karl-Gerät
HL Sherman project?
1/24 Leopard 2 Custom mod
2 many trucks to list!
Re: Katyusha
I am but I will probably add on fenders that flow thru to the back with a much larger fuel tanks. Also the spare tire rack is just what I have now, will probably replace it with a much smaller one. Also need to think about the folding front armour plate for the cab and windshield.Will01Capri wrote:That is perfect. Very nice work.
I was looking and thought it would be a but too much work for me with other projects, but I so glad someone else has pit the time and expense in.
Keep up the good work.
Are you keeping round arches or making new arches for front cab?
As to battling, maybe I can squeeze in a Tamiya One Shot kill so everything in front of it will died................
Re: Katyusha
Here is the 3D printed rails and rockets from Shapeways.wibblywobbly wrote:I did one a few years back before 3D printers were invented, I recall making the framework out of wooden kebab skewers and styrene rods, the rocket rails were cut out of long strips of styrene cut from a sheet glued to make girder style launch rails. I stuck flashing led's all over the rails to give that rocket launching effect.
Things would be so much easier nowadays.
There was a guy at the time who made one out of brass, and like he said, if there was a bolt head on the original, there was a bolt head on his model. Everything was fully functional. Doors, gear wheels etc etc, it was a work of art.
- c.rainford73
- Major
- Posts: 6104
- Joined: Thu Aug 25, 2016 7:34 pm
- Location: Connecticut USA